Bridge Media Slot - Toshiba Portege M400 User Manual

Removing a PC card
To remove the PC card, follow the steps below.
1. Open the Safely Remove Hardware icon on the Task Bar.
2. Point to PC card and click.
3. Press the PC card eject button to extend it.
If the PC card is not inserted all the way, the eject button may not cause it
to pop out sufficiently to allows it to be grasped. Be sure to push the PC
card firmly into the computer and slide the eject button again.
4. Press the extended eject button to pop the card out slightly.
5. Grasp the PC card and draw it out.
PC card
eject button

Bridge media slot

This slot lets you insert SD memory card, SDIO card, Memory Stick (Pro)
and xD picture card.
This Bridge media slot supports the following cards.
■
SD card (SD memory card, SDIO card)
■
Memory Stick
■
Memory Stick PRO
■
xD picture card
Precautions on using cards.
Please note that not all cards have been tested and verified to work
correctly. Therefore, it is not possible to guarantee that all cards will
operate properly.
User's Manual
Removing the PC card
Optional Devices
PC card
8-3