Craftsman 247.770330 Operator's Manual page 13

Stopping The Engine
1. Move throttle control lever to STOP
To Empty Bag
1. Unhook bag straps from the lower handle.
2. Unsnap bag clip from the top of lower handle. See Figure 15.
3. Grasp bag handle with one hand and pull lock rod on mounting bracket with
other hand toward engine to release.
4. Lift bag off back of unit.
5. Twist the two buttons on the back of the bag to unlock and empty contents.
See Figure 16. Hold bag handle and bag clip while emptying the contents.
6. Compress bag opening and fold inner flap over opening.
7. Fold outer flap over inner flap and insert buttons on the bag through metal
outlets. See Figure 16.
8. Twist the buttons to lock bag. Place bag back onto unit as instructed in the
ASSEMBLY section.
To Remove Blower Chute
1. Grasp blower chute with one hand and pull lock rod on mounting bracket
with other hand toward engine to release. Refer to Figure 17.
2. Remove blower chute from over the rim of the discharge opening.
OPERATION
posit on.
i
13
2
3
Figure 15
Outer Flap
Figure 16
2
1
Figure 17
4
1
Buttons
Inner
Flap