Battery Packs; Universal Ac Adaptor; Usb Floppy Diskette Drive; External Monitor - Toshiba NB205-N311 User Manual

Battery Packs

You can increase the portability of the computer with additional battery
packs so that, if you're away from an AC power source and your battery
runs low, you can replace it with a freshly charged battery. Please refer to
Chapter 6,

Universal AC Adaptor

If you frequently use your computer at more than one site, it may be
convenient to purchase an additional AC adaptor to be kept at each site in
order to remove the need to always carry the adaptor with you.

USB floppy diskette drive

The 3 1/2" external FDD module can be connected to the USB port.

External monitor

An external analog monitor can be connected to the computer's external
monitor port, with the computer supporting WSVGA video mode. In order to
connect a monitor, follow the steps as detailed below:
1. Connect the monitor cable to the external monitor port.
1. External Monitor port
2. Turn the external monitor's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the FN + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press FN + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5,
keys to change the display setting.
User's Manual
Power and Power-up Modes
1
2
Connecting the monitor cable to the external monitor port
The
for further information.
2. Monitor cable
Keyboard, for further details on using hot
Optional Devices
8-7