Turning Off The Power - Toshiba NB205-N311 User Manual

Turning off the power

The power can be turned off in one of three modes, either Shut Down
Mode, Hibernation Mode or Standby Mode.
Shut Down Mode
When you turn off the power in Shut Down Mode no data will be saved and
the computer will boot to the operating system's main screen the next time
it is turned on.
1. If you have entered data, either save it to the hard disk drive or to other
storage media.
■
Make sure the Hard Disk Drive indicator is off. If you turn off the
power while a disk (disc) is being accessed, you may lose data or
damage the disk.
■
Never turn off the power while an application is running. Doing so
could cause loss of data.
■
Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause
data loss.
2. Click the Start button, then click Turn Off Computer. From Turn Off
Computer menu select Turn Off.
3. Turn off any peripheral devices connected to your computer.
Do not turn the computer or peripheral devices back on immediately - wait
a short period to avoid any potential damage.
Hibernation Mode
The Hibernation Mode feature saves the contents of memory to the hard
disk drive when the computer is turned off so that, the next time it is turned
on, the previous state is restored. Please note that the Hibernation Mode
feature does not save the status of any peripheral devices connected to the
computer.
■
Save your data. While entering Hibernation Mode, the computer saves
the contents of memory to the hard disk drive. However, for safety
sake, it is best to save your data manually.
■
Data will be lost if you remove the battery or disconnect the AC
adaptor before the save is completed. Wait for the Hard Disk Drive
indicator to go out.
■
Do not install or remove a memory module while the computer is in
Hibernation Mode. Data will be lost.
User's Manual
Getting Started
3-7