Table of Contents
Advertisement
PART 2.
Operation Reference
To use the FUNCTION
key
Press the FUNC key to display a function menu that makes it t possible to perform
functions that are not marked on the unit' Ss keys.
"
"To SECRET
AREF ~
oe,
'ALL _DELET.
LABEL EDIT
DATA COMP,
Just like inthe above example display, all of the functions included in a function
menu have a number at the beginning. Press the number, key that sorresponds
to the function you wart to perform,
Whenever a function manu item's leading humber is replaced by "Eg", it means
you can't select that menu item in the operation you are:performing..:
About the. SOUND. Bien
'
The sound menu lets you switch the key input tone and the various alarms of the
SF Unit on and: off.
elle
oe!
.
:
The Gn/off status of each SOUND menu item is:indicated by a dot (@)}.as 8 shown
above,
Z
;
e p ses pe |
To switch the key input. and alarm tones. on 1 and off
Press FUNC once to display the first function menu.
Press 4 to select the SOUND menu item.
Use the .& and W keys to move the dot to the' ita you want to change.
Use <4 and > to switch the key input tone or an alarm tone on and off.
Repeat steps 3 and 4 to change other items if you want.
Press SET to.store your setting and clear the SOUND menu.
:..>
-
Oo
bw
- - Setting Up the
SF Unit
About alarm types
This unit has three types of alarms: the Daily Alarm, Schedule Alarm, and
Reminder Alarm.:The follawing.describes each of these alarms.
Daily Alarm
ac athe Daily Alarm sounds at the same time, everyday,.when the Home-
. Time reaches the time you have set as the Pally Alarm (page 61).
Reminder. Alarm
:
The Reminder Alarm sounds onthe same date eeach month or each year, or
atthe same time everyday. Use the Reminder Mode to set this type ofalarm
(page 47).
Schedule Alarm
eit
The Schedute Alarm sounds at the specified | time ena specitied date. Use
.the Schedule Keeper Mode to set this type_of alarm (page 42).
An alarm tone sounds for about 20 seconds and analarm message appears on
the display whenever an alarm time is reached, even if unit power is switched off.
You can stop the alarm by pressing any key.and then press ESC to return.to the
display that was shown before the alarm began to sound.
important
An alarm will not sound if that type of alarm is-switched off.on.the SOUND
_ .
menu. This is especially important to remember when you want to use
' Reminderand Schédule Alarms, Fordetaits on how to switch alarms on, see
' "About the SOUND menu..." on page 24.
«
Ifthe Daily Alarm set in the Home Time Made and a Daily Reminder alarm
setin the Reminder Mode are set for the same time, the Daily Reminder alarm
takes precedence. This means that the Daily Reminder message appears on
the display when the alarm'tima is reached. -
*
The alarm does not sound if you are performing a data: 'communications
operation when the alarm time is reached.
*
e
The alarm may fail to sound if battery power is too low.
Note
Ifthe message "SECRET DATA?" appears on the display, it means that an alarm
time set in the secret memory area (see page 54) was reached.
~
Advertisement
Table of Contents
