Memory Entry; Simplex/Normal Shift; Odd Split Channel - Kenwood TM-621A Instruction Manual

144/220mhz/440mhz/430mhz fm dual bander
Hide thumbs Also See for TM-621A:
Table of Contents

Advertisement

4-5-5.
Memory Entry
Memory Entry must be done in MAIN band.
@ Simplex/Normal SHIFT
(M.ch 0 ~9, A and b)
1. Press
the
VFO
key
to
select the VFO mode.
2. Select the desired operating
frequency, offset, tone fre-
quency,
etc. (For example
146.100 MHz + shift)
8858882
inne
3. Press the F key. The F in-
dicator
and the memory
channel
indicator
will
tight. (For example ch 8.)
4.Select
the
desired
Memory
Channel
using
the MAIN
Tuning
control
or
the
microphone
UP/DWN switches.
Note: ————_______
You must do this within 5
seconds of pressing the F
key, or the F indicator will
turn off. If the indicator
goes off, you must
press
the F key again.
=
will return to the VFO mode.
1 Odd Split Channels
(M.ch C, and d)
1. Press
the
VFO
key
to
select the VFO mode.
2. Select the desired receiv-
ing frequency, Tone fre-
quency, etc. (For example
147.430 MHz)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-721aTm-721e

Table of Contents