Table of Contents
Advertisement
Frequency of the sub band is not changed | 1. The frequency is that of the call channel.
1. Press the BAND
key, VFO
key, and then
by turning the SUB Tuning control.
BAND key again to change the contents of
the SUB band to that of the VFO frequency.
2. Press the BAND key, MR/M-key, and then
enter
the
desired
frequency
to
each
memory channels.
Then press the BAND key to return to SUB
band.
Programmable
band
scan
fails
during | 1. The frequencies stored in Memory
Chan- | 1. Make even the frequency steps.
12.5 kHz VFO step.
nels A and/or b are not in 12.5 kHz step.
Memory cannot be backed up.
Backup battery voltage is low.
See Microprocessor memory back-up page 22.
2. The frequency is that of the Memory Chan-
nel, and all memories have the same con-
tents.
Advertisement
Table of Contents
