Table of Contents
Advertisement
3.
24
Press the F key. The F in-
dicator
and
the
memory
channel
indicator
will ap-
pear. (For example 5 ch)
. Select Memory Channel C
or d using the MAIN Tun-
ing control or the micro-
phone UP/DWN
switches.
(For example ch d)
Note: ——_________
You must do this within 5
seconds of pressing the F
key, or the F indicator will
turn
off.
If the
indicator
goes off, you must press
the F key again.
. Press the MR/M key within
5
seconds
of
selecting
Memory Channel C or d.
Note: ———@_—_______
If the indicator goes off,
you must press the F key
again.
After pressing the MR/M
key the F indicator will re-
main on and the Memory
Channel number will turn
off.
. Within 5 second of press-
ing the MR/M
key, select
the transmitting frequency
using
the
MAIN
Tuning
control or the microphone
UP/DWN_
switches.
(For
example 146.430 MHz)
. Press
the
MR/M_
key
within 5 seconds of selec-
ting the transmitting
fre-
quency.
The F _ indicator
goes
off
signaling
Split
Memory
Channel
Entry is
complete.
. To confirm the contents of
the
Split
Memory
press
the MR/M
key and recall
the desired channel (cord).
The
receiving
frequency
will appear in the display.
. Press
the
REV
key
or
microphone PTT switch.
The transmitting frequency
will appear in the display.
Advertisement
Table of Contents
