Table of Contents
Advertisement
4. Set to Service Mode.
(10)-2, Leading Edge Registration in Enlargement Mode
5.
To adjust the A3 Full Size Registration, press the following keys in the indicated sequence: Copy
Quantity and Zoom Key © two times; the Start Key one time and the Copy Quantity and Zoom Key
@ three times.
1.
Once the 1:1 Zoom Registration has been adjusted, make
one copy using A4 or 8-1/2" x 14" paper ata x 1.56 en-
largement ratio.
2.
Ifthe registration Is up to the specifications, go to the ad-
justmentin the reduction mode. Ifit deviates from the spec-
ifications, perform the following steps to make the adjust-
ment of. leading edge registration in the enlargement
mode.
1159D022AA
:
Press the Keys in order of [1], [2], [3].
"A3" will appear In the Display Panel.
[4], [5], and [6].
|
'
@ This adjustment should be made after the "adjustment of leading edge registration in the full size
,
mode".
wey
6.
Press the Start Key to change the settings for the Full Size Registration.
'
:
a
Press the Clear/Stop Key to set the settings.
i
3.
Set to Service Mode.
4.
To adjust the A4 Enlargement Registration, press the following keys In the indicated sequence: Copy
Quantity and Zoom Key © two times; the Start Key one time and the Copy Quantity and Zoom Key
© four times.
Setting Instructions
@ If diméntion A on the copy is longer than 21.5 mm, increase the setting value.
@ |f dimention A on the copy is Shorter than 18.5 mm, decrease the setting value.
* If the measurement does not fall within the specifications through one setting, try another setting.
11590026AA
Press the Keys in order of [1], [2], [3],
"A4' will appear In the Display Panel.
[4], {S], [6], and [7].
Touch This Key if
Measurement is Longer.
Touch This Keyif
1159D024AA
Measurement Is Shorter.
8.
After the adjustments have been made, press the Clear/Stop Key to restore the copier to the normal
|
copy mode.
Advertisement
Table of Contents
