English (Gb) Safety Instructions - Grundfos Control MPC Safety Instructions And Other Important Information

English (GB) Safety instructions

Original safety instructions
These safety instructions give a quick overview of the
safety precautions to be taken in connection with any
work on this product. Observe these safety
instructions during handling, installation, operation,
maintenance, service and repair of this product.
These safety instructions are a supplementary
document, and all safety instructions will appear
again in the relevant sections of the installation and
operating instructions. Keep these safety instructions
at the installation site for future reference.
General information
Read this document before you install the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
Electrical installation
The electrical installation must be carried
out by an authorised person in accordance
with local regulations and the relevant
wiring diagram.
Servicing the product
WARNING
Electric shock
Death or serious personal injury
‐
Switch off the power supply before you
start any work on the product.
‐
Lock the main switch with a padlock to
ensure that the power supply cannot
be accidentally switched on.
Fault finding
WARNING
Electric shock
Death or serious personal injury
‐
Switch off the power supply for at least
five minutes before you start any work
on the product.
‐
Make sure that the power supply
cannot be accidentally switched on.
Taking the product out of operation
WARNING
Electric shock
Death or serious personal injury
‐
Do not touch the conductors in front of
the main switch as they are still
energised.
‐
Lock the main switch with a padlock to
ensure that the power supply cannot
be accidentally switched on.
Disposing of the product
This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin
symbol on a product means
that it must be disposed of
separately from household
waste. When a product
marked with this symbol
reaches its end of life, take it
to a collection point
designated by the local waste
disposal authorities. The
separate collection and
recycling of such products will
help protect the environment
and human health.
See also end-of-life information at
www.grundfos.com/product-recycling.
5