HEIDENHAIN TD 110 Operating Instructions Manual page 24

5.2 Device overview
5.2.1 Connections of the product
NOTICE
Reduced ingress protection due to missing or
unsuitable protective cap
If no cable is connected to the product's connection, the
ingress protection of the product cannot be guaranteed
while it is inside the machine's working space.
Remove the protective cap only for connecting a
cable
Attach a suitable protective cap to the connection
immediately after disconnecting a cable
24
Side view
Further information: "A", Page 3
1 Sensing surface
2 Tool to be measured
3 Cable connection X1: 8-pin M12 adapter cable
4 Mounting screws: M5x25 cylinder head screws
5 LED: display of device status
Green
The device is on and ready for operation
Blue
Tool detected (duration: max. 1 second)
Red
Device error; reset required (power cycle)
6 Measuring range
Circuit diagram
Further information: "B", Page 4
Signal behavior
Further information: "C", Page 4
Connection example
Further information: "D", Page 4
HEIDENHAIN | TD 110 | 05/2023