HEIDENHAIN TD 110 Operating Instructions Manual page 22

3.4.2 Storage of the product
Package the product as described above
Observe the specified ambient conditions
Inspect the product for damage after any transport or
longer storage times
4 Mounting
4.1 Mounting the product
The following steps must be performed only by
qualified personnel.
Further information: "Personnel qualification",
Page 20
22
WARNING
Crushing and impact hazards due to moving parts
When mounting work is performed inside a machine's
working space, moving parts may lead to crushing or
impact.
Secure all movable parts
Wear protective gear
In order to ensure the proper operation of the
product in accordance with its intended use, it
must be installed in the machine so that it cannot
move out of place.
HEIDENHAIN recommends mounting the
product by means of the two provided screws in
accordance with the dimension drawing.
Further information: "A", Page 3
HEIDENHAIN | TD 110 | 05/2023