(d) Capacity Code Setting (DSW3)
This dip switch is utilized for setting the capacity code which corresponds to the Horse Power of
the indoor unit.
Factory setting:
(e) Refrigerant Cycle No. Setting (DSW5)
Setting is required.
Factory setting:
DSW5 can be set from 0 to 63.
(f) Fuse Recover (DSW7)
No setting is required. Setting positions before shipment are all OFF.
NOTE:
•
The "■" mark indicates position of dip switches. Figures show setting before shipment.
CAUTION
!
•
Before setting dip switches, firstly turn OFF power source and set the position of the dip switches.
If the switches are set without turning OFF the power source, the switch settings made are not
recognized.
DSW3
2.0
2.5
5.0
6.0
DSW5
-21-
10. Common
3.0
4.0