Initial Setup; Installing The Stand - ViewSonic VS19613 User Manual

Initial Setup

This section provides detailed instructions for setting up your monitor.

Installing the Stand

1. Place the monitor on a flat, stable surface with the screen facing down.
2. Align the mounting holes of the stand with the VESA mounting holes at the rear
of the monitor.
3. Secure the stand to the monitor with the screws provided.
4. Lift the device into its upright position on a flat, stable surface.
NOTE: Always place the device on a flat, stable surface. Failure to do so may
cause the device to fall and damage the device and/or result in personal
injury.
10