Bosch CDG634A 0 Series User Manual And Installation Instructions page 13

Hide thumbs Also See for CDG634A 0 Series:
Table of Contents

Advertisement

Press ​ ⁠ to resume operation.
4.
Cancelling the end time
You can delete the set end time at any time.
Press ​ ⁠ to pause operation.
1.
9  Dishes
You can use "Dishes" mode to very easily cook food.
The appliance will choose the optimal setting for you.
9.1 Setting a dish
Note: The cooking time depends on the dish. You can-
not change the cooking time.
Press
​ ⁠ .
1.
Use the control ring to select the appropriate dish.
2.
Press ​ ⁠ to confirm the dish.
3.
a The display shows which shelf position and which
accessories or cookware to use.
Use ​ ⁠ to start the operation.
4.
a The appliance starts to heat and the time counts
down.
a The displayed cooking time may change during the
first few minutes, as the heat-up time depends on
the temperature of the ingredients and the water,
amongst other things.
a Once the set cooking time has elapsed, an audible
signal sounds and the appliance stops heating.
Once the cooking time has elapsed:
5.
Press
​ ⁠ to end the audible signal early.
For some dishes, you can extend the cooking
time if necessary.
→ "Extending the cooking time", Page 13
When the dish is ready, press
pliance off.
9.2 Setting a later end time
You can set a later end time for certain dishes.
Requirements
¡ A dish must have been selected.
¡ Cooking must not yet be in progress.
Press
​ ⁠ .
1.
Use the control ring to set the end time.
2.
Press ​ ⁠ to start.
3.
a The start time will appear on the display. The appli-
ance is in standby mode.
9.5 Overview of the dishes
Follow the instructions for the dishes.
Dish
Steam cauliflower florets
Steam broccoli florets
Steam green beans
​ ⁠ to switch the ap-
Weight/amount
Florets of equal size
Florets of equal size
-
Press
​ ⁠ twice.
2.
Use the control ring to change the end time.
3.
Press ​ ⁠ to resume operation.
4.
a The appliance will start heating again and the cook-
ing time will count down.
a Once the start time has been reached, the appli-
ance will start heating and the cooking time will start
counting down.
a Once the cooking time has elapsed, an audible sig-
nal will sound. The time shown on the display will be
zero.
Note: You cannot change the end time later on.
9.3 Extending the cooking time
For some dishes, the appliance allows you to extend
the cooking time once the set cooking time has
elapsed. You can do this as often as required.
If you do not want to extend the cooking time, press
1.
​ ⁠ and then use
​ ⁠ to switch the appliance off.
To extend the cooking time, press ​ ⁠ .
2.
a A cooking time appears on the display.
If necessary, use the control ring to change the
3.
cooking time.
Use ​ ⁠ to start the operation.
4.
a The appliance starts to heat and the time counts
down.
a Once the cooking time has elapsed, an audible sig-
nal sounds. The appliance stops heating. The noti-
fication for extending the cooking time appears
again.
Once the cooking time has elapsed:
5.
Press
​ ⁠ to end the audible signal early.
If you want to extend the cooking time again,
press ​ ⁠ .
When the dish is ready, press
pliance off.
9.4 Cancelling settings
The settings cannot be changed once cooking is in
progress.
To delete all settings, press
ance off.
a All settings are now deleted. You can configure new
settings.
Accessories/cookware
Perforated + unperforated steaming
tray
Perforated + unperforated steaming
tray
Perforated + unperforated steaming
tray
Dishes en
​ ⁠ to switch the ap-
​ ⁠ to switch the appli-
Shelf pos-
ition
2 + 1
2 + 1
2 + 1
13

Advertisement

Table of Contents
loading

Table of Contents