Speaker; Start Up; Status Bar; Switch Map - TomTom NAVIGATION SYSTEM Reference Manual

Speaker

Speaker

Start up

Start up

Status bar

Status bar

Switch map

Maps
Tap this button to select the loudspeaker or loudspeaker connection that
is used by your device.
Tap this button to set what happens when your device starts.
Tap this button to select the information you want to see on the status
bar:
Horizontal - show the status bar at the bottom of the Driving view.

Vertical - show the status bar on the right-hand side of the Driving

view.
Maximum speed

Important: The speed limit is shown next to your current speed. If you
drive faster than the speed limit, you see a warning indicator in the status
bar, for example the status bar pane turns red.
Information about speed limits is not available for all roads.
Current time

Remaining distance - the distance to your destination.

Leeway - your device shows how late or early you will arrive, com-

pared with your preferred arrival time that was set when you planned
the route.
Tap this button to select the map you want to use for route planning and
navigation.
Although you can store more than one map on the device, you can only
use one map at a time for planning and navigation.
To switch from the current map to plan a route in another country or
region, simply tap this button.
Note: The first time you switch to a map, you may need to connect to
60