Siemens TI907F01 Instruction Manual page 58

en Menu settings
Removing the water filter
If a new water filter is not inserted, the
"Water filter" function must be
deactivated.
Select "Water filter" in the menu
1.
settings.
Select and confirm the "remove"
2.
setting.
Remove the water filter from the
3.
water tank.
Re-insert the water tank.
4.
The appliance is ready for use again.
Frost protection
A service programme to prevent frost
damage during transportation and
storage. This programme completely
empties the appliance. The appliance
must be ready for use and the water
tank filled.
Press the rotary selector to start the
1.
programme.
Empty the water tank and re-insert;
2.
the appliance performs rinsing.
Empty the drip tray and thoroughly
3.
clean the appliance.
The appliance can now be transported
or stored.
58