Table of Contents
Advertisement
3.19 Choosing a Startup Image
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode. Refer to 3.3 "Switching
between Record and Playback" on page 5.
2. Press
or
3. Press the MENU button, then press or
(
).
4. Press
or
button.
5. Set the camera to the Setup Menu. Refer to 3.4.5 "Setup
Menu" on page 9.
6. Press
or
button.
7. Press
or
MENU button to apply the setting.
8. Press the MENU button to close the menu.
•
The start-up image will not be deleted even if the original image is deleted or memory for-
matted.
3.20 Formatting the Memory
To erase all data stored in the memory card if you are using a card, or all data stored in the
internal memory if there is no card inserted.
1. Set the camera to the Setup Menu. Refer to 3.4.5 "Setup Menu" on page 9.
2. Press or
to select FORMAT (
3. Press the SET button to start format, or press the MENU button to cancel it.
•
A "BUSY...PLEASE WAIT" message displays and the memory card is starting format.
•
A "COMPLETED" message displays when finish formatting.
•
All data will be deleted including protected ones. Be sure to download important files to
your computer before formatting.
3.21 Resetting to Default Settings
You can reset the entire menu and button operation settings to initial default.
1. Set the camera to the Setup Menu. Refer to 3.4.5 "Setup Menu" on page 9.
2. Press
or
submenu.
3. Press or
to select YES then press the SET button to reset all settings.
24
Using the Camera
to select a desired image.
to select an option, and then press the SET
to select S.IMAGE (
) then press
to select a desired image and press the SET or the
) then press or the SET button.
to select RESET ALL (
to select S.IMAGE
or the SET
) then press or the SET button to launch the
Advertisement
Table of Contents
