Playing Back Sounds; Recording A Voice Memo - BenQ DC 1000 User Manual

3.9.1.2 Magnifying Still Images
1. Set the camera to the Playback mode. Refer to 3.3 "Switching
between Record and Playback" on page 5.
2. Press or
3. Press [T] to magnify the image, and the central portion of the
image is displayed. You can use the arrow button to view
different parts of the magnified image.
3.9.1.3 Playing Back Movie Clips
1. Set the camera to the Playback mode. Refer to 3.3 "Switching
between Record and Playback" on page 5.
2. Press or
playback.
3. Press the SET button to start the movie.
•
The movie clip will play on the LCD monitor.
4. Press the MENU button to stop the movie, or press the SET
button to pause the movie.
•
When movie clip paused, press the SET button again to
resume.

3.9.2 Playing Back Sounds

1. Set the camera to the Playback mode. Refer to 3.3 "Switching between Record and
Playback" on page 5.
2. Press or to select the audio clip that you want to play back.
3. Press the SET button to start playing the audio clip.
4. Press the MENU button to stop the audio clip, or press the SET button to pause it.
•
When audio clip paused, press the SET button again to resume.

3.9.3 Recording a Voice Memo

You can add a voice memo to the still images after you record it.
1. Set the camera to the Playback mode. Refer to 3.3 "Switching
between Record and Playback" on page 5.
2. Press or to select a still image that you want to add a voice
memo.
3. Press the MENU button, using or
MEMO ( ) and press the SET button.
•
If the image already has the voice memo recorded, the
tor. The new recording will replace the previous one.
4. Press the SET button to start recording for 30 seconds, or press the MENU button to
cancel it.
5. Press the SET button again to end recording.
16 Using the Camera
to select the image that you want to magnify.
to select the movie clip that you want to
to select VOICE
appears on the LCD moni-