Table of Contents
Advertisement
34 Playback mode
Startup image
Sets the welcome screen when the camera is powering on.
To select a startup image:
1. Press
>
• To use the default startup image, select Default.
• To use a custom image, select My Photos and press
• To disable the startup image, select Off.
2. Press
.
DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the memory
card for printing and specify the number of print copies in advance using the camera. This
is extremely convenient for sending the images to a photo developing service or for printing
on a direct print function compatible printer.
To set up DPOF:
1. Press
>
2. Press
or
• To set the DPOF setting for one image in a time, select One. and press
select an image.
• To set the DPOF setting for all images in a time, select All.
• To clear all DPOF settings to initial default, select Reset.
3. Press
or
4. Press
5. Press
.
Radial Blur
Applies a rotating motion effect to give a feel of speed.
To apply a Radial Blur effect:
1. Slide the mode switch to
2. Press
or
to move to the image you want to add a Radial Blur effect.
3. Press
>
4. Press
or
5. Press
to confirm the change and save the image file.
> Startup Image >
> DPOF.
and select one of the following options.
to specify the number of copies.
to decide whether you want to turn the date stamp on.
.
> Radial Blur >
and select a degree of Radial Blur.
or
.
or
to select an image.
or
.
or
to
Advertisement
Table of Contents
