Webasto BlueCool V-PRO Series Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Webasto Manuals
  4. Air Conditioner
  5. BlueCool V-PRO Series
  6. Operating instructions manual

Webasto BlueCool V-PRO Series Operating Instructions Manual

Marine chiller air-conditioning systems
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operating Instructions
Marine Chiller Air-Conditioning Systems
BlueCool V-PRO
English
This document is valid for:
V-PRO60 M -400V -REV -R410a 2510228A
V-PRO90 M -400V -REV -R410a 2510229A
V-PRO130 M -400V -REV -R410a 2510230A
V-PRO180 M -400V -REV -R410a 2510231A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BlueCool V-PRO Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Webasto BlueCool V-PRO Series

Summary of Contents for Webasto BlueCool V-PRO Series

  • Page 1 Operating Instructions Marine Chiller Air-Conditioning Systems BlueCool V-PRO English This document is valid for: V-PRO60 M -400V -REV -R410a 2510228A V-PRO90 M -400V -REV -R410a 2510229A V-PRO130 M -400V -REV -R410a 2510230A V-PRO180 M -400V -REV -R410a 2510231A...

  • Page 2: Table Of Contents

    Purpose of this document..........  3 Using this document.......... 3 Use of symbols and highlighting ........  3 Warranty and liability.......... 3 Webasto Service App.......... 3 Safety .......... 3 Intended use .............  3 Regulations and legal requirements ...... 3 Unit details .........  3 Conformity ..............

  • Page 3: About This Document

    Purpose of this document Intended use The Operating Instructions (OI) are an integral part of the The BlueCool V-PRO Series is used for heating and cooling on product and provide the information required to ensure correct boats and ships. and safe operation.

  • Page 4: Product Variants

    NOTE 4.2.4 Operation Webasto recommends operating the screen using your fingers only. The touch sensitivity of the screen is op- After switching on, the control system starts up all V-PRO units timized to fingertip contact. The screen may not re- within the system in steps in the selected operating mode.
  • Page 5 Operation | 4 4.2.5 Select operating mode The Operating Mode button (6) is used to set the operating mode. The options are: l COOL (cooling mode) l HEAT (heating mode) l HEAT AUX (Heating mode combined with an external heater) NOTE If a different operating mode is selected when the unit is in operation, then the whole system initially shuts...

  • Page 6: Settings

    The sea water circuit must only be cleaned by an expert (in- – The selected settings are then adopted. staller or Webasto Service Centre). Tap the Home screen (symbol: ) symbol to return to the Cold water circuit Home screen.

  • Page 7: Decommissioning

    Decommissioning | 6 l In closed systems, check the static prepressure in the sys- tem at least once a month. In the event of a pressure drop, repair leaks and top up with water/glycol mixture. l Check the entire cold water circuit for leaks at least once a month;...

  • Page 8: Malfunctions

    Correction E100 - Undervoltage Switch-off in case of undervoltage. Power supply Please contact your authorised Webasto Marine dealer. below set undervoltage value for longer than 5 seconds. Cause is probably excessively long cable, overloading or an insufficiently high power gen- erator output.
  • Page 9 Status / Error message Possible cause Correction E201 - Cold water temperature Cold water temperature sensor defective or Please contact your authorised Webasto Marine dealer. sensor outlet break/short-circuit in electrical circuit. 10 E202 - Cold water temperature Cold water temperature sensor defective or Please contact your authorised Webasto Marine dealer.

  • Page 10: Annex

    35 E353 - Power supply is not normal The power supply is faulty. Check on-shore connection or generator. 36 E361 - Compressor speed Incorrect speed or incorrect parameters at too Please contact your authorised Webasto Marine dealer. high a load. 37 E362 - Compressor overload Maximum permissible current was exceeded Please contact your authorised Webasto Marine dealer.
  • Page 11 Slovenščina Colour Background colour White White Black Standby Selects the standby mode display 1 Webasto logo Webasto logo 2 Customer logo 3 Standby off °C, °F 4 System: cold water temperature °C, °F 5 System: sea water temperature A; % 6.
  • Page 12 To request this documentation in another language, please locate and contact your local Webasto dealer. You can find your nearest dealer at: https://dealerlocator.webasto.com/en-int. To provide feedback (in English or German), please email: feedback2tdt@webasto.com Europe, Asia Pacific: UK only: USA only: Webasto Thermo &...

This manual is also suitable for:

Bluecool v-pro60 m-400v-rev-r410aBluecool v-pro90 m-400v-rev-r410aBluecool v-pro130 m-400v-rev-r410aBluecool v-pro180 m-400v-rev-r410a

Table of Contents