Alcatel TEMPORIS 25-EX User Manual

TEMPORIS 25-EX
TEMPORIS 25-EX
Alcatel Logo and Alcatel name are trademarks of Alcatel and used under
license by ATLINKS.
INTRODUCTION
quality performance. To get the most from your new telephone, we
suggest that you take a few minutes right now to read through this
User's Tips.
If you have any questions or problems, consult the Troubleshooting
Tips for the solution.
PARTS CHECKLIST
Your package should contain the following items:
Base Handset Coiled cord Line cord
INSTALLATION AND SETUP
You GE telephone can be mounted on the wall or placed on a
the appropriate installation diagram.
BEFORE YOU BEGIN
MODULAR JACK REQUIREMENTS
You need a RJ11C type modular jack, which is the most
common type of phone jack and might look like one
pictured here. If you don't have a modular jack, call your
Modular telephone line jack
DESKTOP INSTALLATION
5
3
2
1
4
RINGER
setting is HI.
2. Set the PULSE/TONE switch to TONE if you use Touch-Tone Service;
Set it to PULSE
3. Set the Flash time switch (600ms, 300ms, 100ms) to the appropriate
setting.
600ms.
4. Plug the handset cord into the handset, and into the telephone
jack on the left side of the unit.
5. Plug the telephone line cord into a modular jack (RJ11C) and into
the LINE jack on the back of the unit.
6. Place the handset to base cradle.
WALL MOUNT INSTALLATION
The telephone can be mounted on a wall phone plate (not included).
mount.
180
2. Set the RINGER VOLUME
setting is HI.
3. Set the PULSE/TONE switch to TONE if you use Touch-Tone service:
set it to PULSE
4. Set the Flash time switch (600ms,300ms,100ms) to the appropriate
600ms.
6. Plug the phone cord into the phone jack on the back of the unit.
7. Connect the phone cord to the modular jack on the wall.
8. Place the base to the wall mount plate.
Wall plate
9. Plug the handset cord into the handset and into the unit, and then
hang up the phone.
9
6
USING FEATURES
MAKING A CALL
1. Lift the handset and wait for a dial tone.
RECEIVING A CALL
Lift the handset to answer the call.
RINGER VOLUME CONTROL
Use the RINGER volume switch on the back of the base to adjust the
volume of the ringer.
TONE.
FLASH BUTTON
Press the FLASH button instead of using the hook switch to activate
customer calling services such as call waiting or call transfer, which
are provided by your local phone company.
REDIAL BUTTON
Redial the last number you called by pressing the REDIAL button after
you get a dial tone. Maximum digits of redial is 32.
Flash button
TROUBLESHOOTING TIPS
PROBLEM
TONE.
No dial tone Check hook switch to make sure it pops up.
Can't dial out Make sure TONE/PULSE is set to correct position.
Unplug the phone, wait 30 seconds, and plug
the phone back in.
Phone doesn't Check phone line cord.
ring Could have too many phones on one line. (The to
REN of all phones should not be greater than the
maximum REN for your area, Usually 5.)
CARE AND MAINTENANCE
To keep your phone working and looking good, please follow the
guidelines:
date.
Used equipment must be disposed of in compliance
with current environmental protection regulations.
You should return it to your reseller or dispose of it in a
approved recycling centre.
Use/Ring indicator
Redial button
SOLUTION
Model Temporis 25
00030369 (Rev.1 E/
09-37
Printed in China