9P0laris'
Page 7
Cleaning the ln-Line Filter
Screen
f
47»
To clean the in-line filter screen, pull it out
'i
'-
g0"!
ofthe filter assembly, rinse and press firmly
'
'
back into place.
A CAUTION
Always disconnect the Polaris before cleaning or backwashing your pool filterto avoid potential
clogging or damage to the system. Allow the filtration system run for at least five (5) minutes
before re-connecting the cleaner.
Storage and Winterizing
Never store the cleaner in direct sunlight. When storing forthe winter, drain all the water from the
cleaner (freeze damage is not covered under the warranty). Use the Quick Disconnect to remove
the UWF from the pool wall. If necessary, use the UWF Removal Tool (part #10-102-00) available
from any Polaris dealer.