Table of Contents
Advertisement
Operation
Transmit / Receive
Stop
Antenna must be
installed before TX
Note
While
PTT button is
depressed you cannot
receive transmissions.
To transmit, push and hold
1
The TRANSMISSION POWER METER will be
2
displayed when transmitting.
Note
During transmit, your
outgoing transmission power
is measured in watts and
displayed on the bar graph.
8
PTT button.
3
Release
transmissions.
The INCOMING SIGNAL STRENGTH METER will be
displayed when a signal is received.
Hold mic about
3
2 inches from
mouth. Speak
in a normal
voice.
PTT button to receive incoming
Operation
Note
Your HH38 WX ST is always
ready to receive incoming
signals when the PTT button is
released.
When you are receiving an
incoming signal, the strength
of that signal will be displayed
on the bar graph.
9
Advertisement
Table of Contents
