Pioneer MJ-L7 Service Manual page 38

MJ-L7
Step No. Setting Method Remarks Display
Step 15 Press the MENU button Groove: Tracking gain adjustment [ GTG:COe@e ]
Step 16 Press the MENU button Groove: Tracking error balance adjustment [ GTB:O0@e |]
Step 17 Press the MENU button Focus gain fine adjustment [ LFG:00ee ]
Step 18 Press the PLAY/PAUSE button Groove continuous playback [al CAAAA |
Step 19 Press the CANCEL button Moves to step 17
@ OO: Measurement, @@: Setting, NOOO: Address (Cluster), AAAA: Cl error, ¢ @: Temperature code, mill: Model code,
AA: Microprocessor ROM version (From 01), #4: EEPROM protect data version (From 01)
@ When the CANCEL button of DISPLAY unit is pressed in each step, the unit will shift to the opposite step.
@ When the + button of DISPLAY unit is pressed when the setting is displayed, the setting will increase and the new setting will be stored
in the RAM.
@ When the — button of DISPLAY unit is pressed when the setting is displayed, the setting will decrease and the new setting will be stored
in the RAM.
@ When the STOP button of the Unit is pressed when the MANUAL menu is displayed, the test mode STOP state will be set.
@ When the STOP button of the Unit is pressed when the measurement or setting is displayed, the MANUAL menu display will be set.
Note: Some items have * in front of the setting in the MANUAL mode.
6.2.4 EEPROM Setting Mode
(1) Focus Setting
| Step No. | Setting Method Remarks Display
Test mode STOP state [ tsmmm A ACH & |
Press the MENU button four times | Reads each setting from the EEPROM. [ EEPROM SET ]
EEPROM menu display mode
Press the PLAY/PAUSE button Focus setting menu [ Focus ]
Press the PLAY/PAUSE button Focus system loop filter gain constant setting [FG ¢¢]
Press the MENU button Focus system loop filter frequency characteristics 2 setting [FF2 ¢¢]
Step 7 Press the MENU button Focus system loop filter frequency characteristics 3 setting [FF3 ¢¢]
Step 8 Press the MENU button Focus system loop filter frequency characteristics 4 setting [FF4 44]
Step 9 Press the MENU button FZC detection hysteresis level setting [ FZHLEV ¢ 4]
Step 10 Press the MENU button FOK generation comparison level setting (Normal) [ FOKLEVn ¢¢]
Step 11 Press the MENU button FOK generation comparison level setting (When focus is ON) [ FOKLEVE ¢ ¢]
Step 12 Press the MENU button FOK generation LPF coefficient setting (Normal) [ FOKLPFn ¢ 4]
Step 13 Press the MENU button FOK generation LPF coefficient setting (When focus is ON) [ FOKLPFf ¢ ¢]
Step 14 Press the MENU button Waiting time for Auto focus completion setting [ WAITT ¢ 4]
@ ¢¢: Setting
@ When the CANCEL button of DISPLAY unit is pressed in each step, the unit will shift to the opposite step.
When the + button of DISPLAY unit is pressed when the setting is displayed, the setting will increase and the new setting will be stored
in the RAM.
@ When the — button of DISPLAY unit is pressed when the setting is displayed, the setting will decrease and the new setting will be stored
in the RAM.
When the STOP button of the Unit is pressed when the EEPROM setting menu is displayed, the test mode STOP state will be set.
When the STOP button of the Unit is pressed in the focus setting menu state, the EEPROM setting menu state will be set.
When the STOP button of the Unit is pressed at each setting item display state, the focus setting menu state will be set.
38