Minolta MNCD50 Quick Manual page 2

Q: My camera will not respond to any buttons presses. Why is this happening?
A: Your dash-cam is designed to prioritize the recording of video and will not allow any interruptions. The menu and other
modes can only be operated while the dash-cam is in standby (not recording).
Q: How can I access the menu or change modes while my camera is recording (blinking red dot
A: If Motion Detection is enabled (if this icon
1) Set your dash-cam on a flat surface. Press the RECORD button to ensure that the red dot on the screen is no longer
blinking. Now press the menu button.
OR
2) Remove the MicroSD memory card by pushing it in. It will bounce back out. You can now press the MENU or MODE
button to access the menu and other modes. If you select PLAYBACK mode, be sure to reinsert your MicroSD card so you
can play back your files.
Q: How can I disable Motion Detection
A: With the MicroSD removed, make sure you are in VIDEO mode and press the MENU button.

Navigate to Motion Detection with the UP and DOWN buttons.

Press the RECORD button.

Select OFF and press the RECORD button again to confirm the setting.

Press the MENU button twice to save and exit the menu.
FAQ
displays on the left side of the screen), please follow one of these steps:
?
ADDENDUM A
at top of screen)?