Default Setting: Allows to reset all of the settings to factory defaults.
Version: Displays the current firmware version.
***To imprint your CAR NUMBER or LICENSE PLATE NUMBER on recorded media:
While in either PHOTO or VIDEO mode, press the MENU button twice to access the SETUP/MAIN
settings.
Press the UP and DOWN buttons to navigate through the various settings within the menu.
Once highlighted on "Car Plate", press the RECORD button to access the submenu.
You are presented with 8 spaces for entering a character. The first space is automatically
selected. To change characters within a space, press the UP and DOWN buttons to cycle through
the available characters. You may select from letters, numbers and a blank space.
Press the RECORD button to confirm a highlighted character. The submenu will automatically
proceed to the next character entry space.
Repeat the above steps until you have completed your desired character entry.
Press the MENU button again at any time to save your settings and exit the menu.