Related Manuals for Foscam T8EP
Summary of Contents for Foscam T8EP
- Page 1 User Manual User Manual Foscam 4K/8MP Outdoor POE IP Security Camera Model: T8EP V1.1...
-
Page 2: Table Of Contents
1.3 Read before Use..............................4 1.4 Packing Contents..............................4 1.5 Physical Description.............................. 4 1.6 SD Card Management............................5 1.7 Add Device: Connection via the Foscam App....................5 1.8 Installation................................6 1.9 Waterproof Lid Installation Guide........................7 2 Default Parameters................................8 3 Specification..................................8... -
Page 3: Overview
H.264+/H.264 video Compression Supports Human detection, Motion Detection and Vehicle Detection Compatible with free Foscam Video Management Software Compatible with free Foscam iOS and Android APP Supports PoE Function Supports Full Duplex two-way Audio ... -
Page 4: Read Before Use
1.3 Read before Use Please first verify that all contents received are complete according to the Package Contents listed below. Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly as intended. -
Page 5: Sd Card Management
When you plug in the SD card during the camera work process, please reboot the camera again, or else the SD card might not work well. On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status. 1.7 Add Device: Connection via the Foscam App Scan the QR code below to download and install the Foscam APP. -
Page 6: Installation
1.8 Installation Please refer to the Quick Setup Guide. 1. Loosen the anti-theft screws, and rotate the shell and base in opposite direction until point a and b are aligned to remove the shell. 2. Screw o_x001D_ the micro SD cover and Insert a micro SD into the SD card slot. (If you don’t want to use SD card for storage, skip this step). -
Page 7: Waterproof Lid Installation Guide
1.9 Waterproof Lid Installation Guide When mounting your PoE camera outdoors, you are suggested to install the waterproof lid for it. You may follow the steps for installation. 1. Thread the Ethernet cable through the top cover and then the waterproof connector. 2. -
Page 8: Default Parameters
One 10/100Mbps RJ45 port Network Remote Access Network Protocol IP, TCP, UDP, SMTP, FTP, DHCP, RTSP System Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android Operating System Requirements (Foscam app), iOS (Foscam app) Motion Detection Alarm via E-Mail, upload alarm snapshot to FTP... - Page 9 Zoom 6X digital zoom function Support max. 256GB Micro SD card, local and FTP storage, Foscam Storage cloud storage Reset Reset button is available Intelligent Assistant Supports Alexa, Google Assistant Power Supply DC 12V/1.0A (Not standard) Power POE Standard 802.3af Power Consumption 5 Watts (Max.)
Need help?
Do you have a question about the T8EP and is the answer not in the manual?
Questions and answers