Table of Contents
Advertisement
EN
10. Angle
Super Wide/Wide/Medium/Narrow (Default setting is Super Wide)
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Super wide angle captures the largest amount of the
scene, while narrow angle captures the least. This function is not available while
image stabilization is on.
11. Diving Mode
Off/On (Default setting is Off)
Diving Mode can compensate for the lack of yellow light in underwater
environments. This mode can be used in tropical and blue water, optimized for
use between 10 and 80 feet.
12. Exposure
-2, -1, 0, 1, 2 (Default setting is 0)
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the
camera to prioritize when determining exposure. This setting is particularly useful
in shots where an important region might otherwise be over- or underexposed.
When you change this setting, the display immediately shows you the effect on
your image. If you change modes, the camera returns to using the entire scene to
determine the correct level of exposure.
13. WDR
Off/On (Default setting is Off)
Wide Dynamic Range (WDR) retains a greater level of details in the dark and bright
areas of an image. When it's enabled, a photo will be properly exposed for both of
the two extremes. This setting is especially useful for scenes that are backlist or
that have large bright regions and a dark foreground. WDR is available in the
Video mode only.
14. Date Stamp
Off/Date/Date&Time (Default setting is Date&Time)
10
Advertisement
Table of Contents
