Cleaning And Maintenance; Troubleshooting - Pelonis PHT30D7BBC Owner's Manual

CLEANING AND MAINTENANCE

Remote Controller
It is recommended that the heater be cleaned at least one time during the operating
season in order to provide the optimum level of performance. ALWAYS TURN THE
POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save
the box for off-season storage.
• Turn the heater "OFF" , unplug it and wait for the heater to cool down.
• Use a dry cloth to clean only external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and dry place.
• Any other maintenance shall be performed by an authorized.
WARNING
This heater cannot achieve accurate temperature control of the enviroment, and thus
cannot be used as insulation device for storage environment, items, animals and plants.

TROUBLESHOOTING

If the product does not operate or does not operate properly, first check according to
the following list. If the reason the product does not operate or does not operate
properly is not included in the following list, the product mayhave failed. At this time, it
is recommended to send the product to the dealer for treatment.
Problem
After the power is
engaged,the
machine does not
work.
The machine
suddenly stops
during heating.
Cause
• The plug may not be plugged
well.
• The temperature exceeds the
threshold of the thermal
cut-off.
Check whether the plug is
properly inserted into the
receptacle.
Pull off the plug manually, and
then insert it into the
receptacle again when the
machine is cooled.
08
Solution Solution