Cleaning And Maintenance - Pelonis PSH23FT3DSBC Owner's Manual

Protection When Temperature Sensor has short circuit or open circuit
No matter in what mode, the temperature sensor appears short circuit or open circuit,
digital screen displays "E2" or "E1" and constantly flicker, while any key operation is
invalid and the buzzer rings 10 times.
Safety Protection
• In the start state, when the room temperature TH is above 55°C, it will turn off all EN
outputs system. The digital screen displays "FF" and flashes 1 time per second, power
device down to force exit.
• When the unit is in working mode, if the internal temperature of the unit exceeds the
thermal cut-off threshold, it will automatically stop working. In this situation, both the
digital screen and lamp will turn off. Pressing any key will have no effect. To resolve
this, manually unplug the machine and wait for it to cool down. Once cooled, plug it
back into the outlet again to restart the unit.

CLEANING AND MAINTENANCE

It is recommended that the heater be cleaned at least one time during the operating
season in order to provide the optimum level of performance. ALWAYS TURN THE
POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save
the box for offseason storage.
• Turn the heater "OFF", unplug it and wait for the heater to cool down.
• Use a dry cloth to clean only external surfaces of the heater.
• Do not use any cleaning agents or detergents.
• Never immerse the heater in water.
• Pack the heater in the original carton and store it in a cool and dry place.
08