Table of Contents
Advertisement
Front Panel features continued...
While CR StealthBar is in pairing mode,
simultaneously scan for Bluetooth devices on
the device. You should see 'StealthBar' appear
in the list of "available devices". Select it by tapping
it. From there, your Bluetooth device should indicate
that it is successfully connected. The Bluetooth
button will remain solid white until the input selector
switch is changed to Bluetooth, in which case
the ring surrounding the button will turn green.
Previously paired and connected devices:
The Bluetooth connection will disconnect if it's out
of range. Previously paired and connected devices will
automatically reconnect and the Running Man logo /
Bluetooth button will illuminate (if the volume knob
is at least clicked on).
While your Bluetooth device is connected
to a CR StealthBar, you can quickly press
the Bluetooth button on the front of the unit
to pause/play your audio (the same as if
you'd pressed pause/play on your device).
To drop the device from being paired with the
CR StealthBar, press and hold the Bluetooth
button down for at least three seconds.
The Bluetooth may disconnect when affected
by Electrostatic Discharge [ESD]. Manually
reconnect the Bluetooth connection.
8
CR StealthBar Desktop PC Soundbar w/ Bluetooth®
CR StealthBar: Rear Panel Features
4
4. Power Connector
CR StealthBar has a universal external power supply
that accepts any AC voltage ranging from 100 VAC
to 240 VAC. No need for voltage select switches.
It will work virtually anywhere in the world.
That's why we call it a "Planet Earth" power supply!
It is less susceptible to voltage sags or spikes
compared to conventional power supplies,
and provides greater electromagnetic isolation
and better protection against AC line noise.
Attach the AC connector (the small piece that plugs
into the wall) to the power supply adapter (the big
piece with the cable that plugs into the CR StealthBar).
Here's how: line up the tabs of the AC connector
with the open slots of the power supply adapter.
The AC connector should be lined up at about 11:00am
for the tabs to align. Now push down and rotate
clockwise until it "clicks" into place. It only fits one
way, so do not force it if at first you don't succeed!
The power supply adapter may be connected
to the CR StealthBar by pushing it into the power
receptacle on the rear panel and plugging the other
end into a live AC outlet.
You should never have to remove the AC connector
from the power supply adapter, but if so inclined, here's
how: when looking at the plug – cable side towards you
– push and hold the spring switch down. It's located
in the middle-left. While holding the spring switch
down, rotate the AC connector counter-clockwise
until it is unlocked and may be removed.
Only use the factory-authorized power
supply that came with the CR StealthBar.
5. USB I/O
Since the CR StealthBar is a "Desktop PC
Soundbar," the USB connection will (most likely)
be one of the most widely used features. In short,
it is an interface that allows audio to stream to
and from the CR StealthBar via computer.
This is the connection that will be used for gaming,
watching movies and fun cat videos, playing music
or just about any other sound that is emitted from
your computer.
5
6
7
Advertisement
Table of Contents
