Typical Characteristics
Table 1–13: Typical Characteristics — Signal Acquisition System
Name
Frequency Limit, Upper, 100 MHz Band-
width Limited
Frequency Limit, Upper, 20 MHz Band-
width Limited
1
Calculated Rise Time
Nonlinearity
Step Response Settling Errors
TDS 510A Service Manual
The tables in this section list the typical characteristics that describe the
TDS 510A Digitizing Oscilloscope.
Typical characteristics are described in terms of typical or average performance.
Typical characteristics are not warranted.
Description
100 MHz
20 MHz
Volts/Div Setting
5 mV/div–10 V/div
2 mV/div–4.98 mV/div
1 mV/div–1.99 mV/div
1 DL, differential; v1 DL, integral, independently based
<
Volts/Div Setting
1 mV/div–99.5 mV/
div
100 mV/
div–995 mV/div
1 V/div–10 V/div
Rise Time
800 ps
1.2 ns
1.6 ns
Settling Error (%)
Step Ampli-
tude
20 ns
v2 V
v0.5
v20 V
v1.0
v200 V
v1.0
2
100 ns
20 ms
v0.2
v0.1
v0.5
v0.2
v0.5
v0.2
1–19