BMW 5 Series 2023 Owner's Manual page 245

Table of Contents

Advertisement

System limits
Safety information
Warning
Due to its limits, the system may not react, or
it may react too late or in a manner that is not
consistent with normal use. There may be a
risk of accidents or risk of damage to prop-
erty. Actively intervene as warranted. Refer
to the information in this Owner's Manual re-
garding the scope of the system's operation
and limitations.
System limits of the sensors
Additional information:
Sensors of the vehicle, refer to page 36.
Field of view
Because of the camera angle, the areas under
the vehicle cannot be viewed by the cameras.
Detection of objects
Very low obstacles as well as high, protruding
objects such as ledges may not be detected by
the system.
The objects displayed on the control display
may be closer than they appear. Do not esti-
mate the distance to the objects on the control
display.
Protruding cargo or a rear carrier can limit the
detection range of the camera.
Malfunction
A camera failure is displayed on the control
display.
The detection range of the failed camera is
shown shaded on the control display.
Online Edition for Part no. 01405A8A5A2 - VI/23
Parking
Rearview camera
Principle
The rearview camera helps when reverse
parking and maneuvering. The area behind the
vehicle is shown on the control display.
Additional views can be shown on the display,
e.g., parking aid lines and obstacle markings.
General information
Follow the information in the "Parking assis-
tance systems" chapter.
Functional requirements
The trunk is fully closed.
The camera area is clean and clear.
Turning the rearview camera on/off
Turning the camera view on
automatically
When drive-ready state is switched on, the
rearview camera is automatically switched on
if selector lever position R is engaged.
Turning the camera view off
automatically
The rearview camera turns off automatically
when driving forward or when a certain dis-
tance or speed is exceeded.
Turning the camera view on/off
manually
1.
Press the button.
2.
Engage selector lever position R.
Depending on vehicle equipment: The
icon in the selection window is selected au-
tomatically.
CONTROLS
245
OwnersManuals2.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

7 series

Table of Contents