Safety Signs To Be Placed Near The Machine Area - Electrolux HOOT21E User Manual

Residual risk
Slipping or falling
Burns/abrasions (e.g. heating
elements)
Electrocution
Sudden closing of the
technical space (hood door)
Falling from above
Material falling from above
Tipping of loads
Mechanical safety characteristics, hazards
•
The appliance does not have sharp edges or protruding parts. The guards for the moving
and live parts are fixed to the frame with screws, to prevent accidental access.
CAUTION
In case of a significant anomaly (e.g. short circuit, wires coming out of the terminal
block, motor breakdowns, worn electrical cable sheathing, etc.) the operator must:
immediately deactivate the hood and the oven connected to it.
A.5 Safety signs to be placed near the machine area
Prohibition
Description of hazardous situation
The operator can slip due to water or dirt on the floor
The operator inadvertently or intentionally touches some
components inside the machine without using protective
gloves
Contact with live parts during maintenance operations
carried out with the electrical panel powered
The operator inadvertently or intentionally closes the hood's
technical compartment door
The operator intervenes on the machine using unsuitable
means to access the upper part (e.g. rung ladders or climbs
on it)
During maintenance operations the operator drops material
from above
When handling the machine or the packaging containing it,
using unsuitable lifting systems or accessories or with load
unbalanced
Meaning
Do not remove the safety devices
Do not use water to extinguish fires (placed on electrical
parts)
Caution, hot surface
Danger of electrocution (shown on electrical parts with
indication of voltage)
Germicidal Lamps emit UV-C radiation
Harmful to skin and eyes
231007 OM_HO_04_ELUX_EN.docx -
7