Kohler K-528-K1 Installation And Care Manual page 5

AC Power
Controller
1. DTV+ System Layout
The K-99695 system controller powers the interface(s) and controls the digital valve(s) and other system
components. The controller is required to configure the valve(s).
NOTICE: If the valve will be used for a bath/shower application, the bath fill supply line must be routed
from the #1 outlet port.
NOTICE: Custom shower configurations may not allow certain features to be enabled. For shower
configuration options, refer to the guide on the K-99695 controller product page at www.us.kohler.com.
Determine the locations of all required components, including shower fittings.
A data cable is provided to connect the valve to the controller. If the valve is not within 25' (7.6 m)
of the controller, obtain a longer telephone-style cable or add an extension cable.
When routing piping, make sure each shower fitting will connect to the appropriate valve outlet for
your configuration.
Before Operating the System For the First Time:
Download and install the latest software for connected components. This may take an hour or more to
complete based on system configuration and internet connection speed. Do not disconnect the power from
any components during software download and installation.
Kohler Co.
Component Cable
Connections
25' (7.6 m)
Data Cable
Digital
Valve
5
Router
Shower Fittings Water Inlets
Interface
(Up to Three)
Digital
Valve
AC Power
1240338-2-A