Re-Register Your Rapt Pill; General Troubleshooting; Red (Battery) Light Flashes Very Rapidly When Plugged In To Usb-C - KegLand RAPT Pill KL20596 Instruction Manual

RAPT Pill Hydrometer Instruction Manual

Re-Register Your RAPT Pill

If your RAPT Pill is still not sending telemetry despite being connected to Wi-Fi and with a good,
reliable signal strength then you may need to re-register your RAPT Pill to your account. To re-
register your RAPT Pill do not delete the device from the RAPT Portal, instead follow the steps
below:
Connect the Pill via USB-C cable. Open the Pill Captive Portal on your smart phone or tablet. (See
Opening the RAPT Pill Captive
Go to the Registration tab in your Pill Captive Portal.
Click the Clear Registration button, and wait a couple of seconds for a new User Code to be
generated.
Note: If there is no Clear Registration option then the Pill has not been registered to the RAPT Portal
and this step can be skipped.
In a separate device, open and sign in to the RAPT Portal (https://app.rapt.io).
Click on the Edit button of the RAPT Pill that you wish to re-register.
Go to the Troubleshooting tab.
Click the Reset Device Authentication button.
When prompted, enter the new user/validation code that was generated and click Save. Your RAPT
Pill should now be registered successfully.
If you are unable to sign up for an account or your RAPT portal displays an error please forward as
many visual pieces of supporting information and a detailed description of the error to

General Troubleshooting

Red (battery) light flashes very rapidly when plugged in to USB-C

Please install the battery or check that it is making good contact with the terminals.
Page 18 of 21
Signal Strength (dBm)
0 to -30dBm
-50dBm
-60dBm
-70dBm
-80dBM
-90dBM
Portal).
www.KegLand.com.au
What it means
Maximum signal
Excellent signal
Good, reliable signal
Ok, not a strong signal
Poor, unreliable signal
Unusable
Last Updated 6/12/2023 3:24 PM