Bristan CAS BAS C Installation Instructions Manual

Bristan CAS BAS C Installation Instructions Manual

Casino tap range

Advertisement

Quick Links

Installation Instructions
Casino Tap Range
Models covered:
CAS BAS C, CAS BF C, CAS BSM C,
CAS 3HBAS C, CAS 3HBF C,
CAS WMBAS C, CAS WMBF C
Please keep this booklet for future
reference.
Installer, when you have read these
instructions please ensure you leave them
with the user.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAS BAS C and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bristan CAS BAS C

  • Page 1 Installation Instructions Casino Tap Range Models covered: CAS BAS C, CAS BF C, CAS BSM C, CAS 3HBAS C, CAS 3HBF C, CAS WMBAS C, CAS WMBF C Please keep this booklet for future reference. Installer, when you have read these instructions please ensure you leave them with the user.
  • Page 2: Table Of Contents

    Contents Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have designed this product with your enjoyment in mind. To ensure that it works to its full potential, it needs to be fitted correctly. These fitting instructions have been created to give you all of the information you need and, if you need any further help, please do not hesitate to contact us.
  • Page 3: Important Safety Information

    Important Safety Information • Please read these instructions thoroughly and retain for future use. • All products manufactured and supplied by Bristan are safe provided they are installed, used correctly and receive regular maintenance in accordance with these instructions. •...
  • Page 4: General Information

    General Information This product has been tested to the Water Regulations Advisory Scheme (WRAS) and satisfies the requirements of the Water Supply (Water Fittings) Regulations 1999 and current bylaws. For full Installation Requirements & Notes (IRN) please visit www.wras.co.uk/directory. Designed to comply with BS EN 200 for combination taps to be used within systems designed to BS 6700.
  • Page 5: Specifications

    Specifications Working pressure Product Code Inlet CAS BAS C M10 15mm Compression Flexible Tails CAS BF C 3/4" BSP Threaded Tail CAS BSM C 3/4" BSP Threaded Tail CAS 3HBAS C 15mm Compression Threaded Tail CAS 3HBF C 3/4" BSP Threaded Tail...
  • Page 6: Dimensions

    Dimensions Basin Mixer Basin Mixer Bath Filler G 3/4” Dimensions are nominal and in millimetres. Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
  • Page 7 Dimensions Cont. Bath Shower Mixer Bath Shower Mixer G 3/4” 3 Hole Basin Mixer Dimensions are nominal and in millimetres. Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
  • Page 8 Dimensions Cont. 3 Hole Bath Filler 51.5 G 3/4” Wall Mounted Basin Mixer Cavity Depth Min 49.5- Max 53.5 49.5 190.5 Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
  • Page 9 Dimensions Cont. Wall Mounted Bath Filler Cavity Depth Min 64.5- Max 68.5 64.5 Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
  • Page 10: Installation Requirements

    Installation Requirements Flexible Connecting Pipes Care must be taken when connecting the flexible connection pipes to the household pipework to ensure they do not bend sharply and kink or twist. See below for recommended ways to fit the flexible connecting pipes. Slight 90°...
  • Page 11: Installation

    Installation Basin Mixer 1. Screw the flexi tails into the bottom of the mixer body by hand only (DO NOT OVERTIGHTEN). 2. Place the plinth over the hole in the basin and feed the flexi tails through the hole, ensuring the washer is fitted between the plinth and the basin.
  • Page 12: Bath Filler & Bath Shower Mixer

    Installation Cont. Bath Filler and Bath Shower Mixer 1. Place the plinths over the holes in the bath, fit the body to the bath ensuring that the washers are fitted between the plinths and the bath. 2. Secure the body to the bath using the washer and metal backnut below the bath.
  • Page 13: Hole Basin Mixer & Bath Filler

    Installation Cont. 3 Hole Basin Mixer and Bath Filler 1. Remove the shroud from the threaded tail. 2. Fit the side bodies to the basin and secure in place by screwing the locking nut on to the threaded tails and tighten the backnuts under the basin. Replace the shroud and the handle, tighten the grub screw.
  • Page 14: Hole Wall Mounted Basin Mixer & Bath Filler

    Installation Cont. Wall Mounted Basin Mixer and Bath Filler 1. Decide on the final position of the basin mixer/ bath filler. Install suitable battons onto the wall cavity if required (see dimensions on pages 8-9 for minimum and maximum cavity depths). 2.
  • Page 15: Maintenance

    Maintenance General Cleaning 2.5 mm hexagonal key Your fitting has a high quality finish and should be treated with care to preserve the visible surfaces. All surfaces will Handle wear if not cleaned correctly, the only safe way to clean your mixer is to wipe with a Shroud Insert soft damp cloth.
  • Page 16: Troubleshooting

    Troubleshooting Symptom Cause Remedy No flow or low partially closed isolation valve. Open isolation valve. flow rate Instantaneous water heater Increase water flow rate or cycles on and off as flow rate or pressure through system to pressure is too low. meet required minimum working pressure of tap.
  • Page 17: Notes

    Notes Please use this space to add any notes you or your installer may have regarding the plumbing system / installation of this product. Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
  • Page 18: Guarantee

    Guarantee At Bristan, we want to make things as • Repair under this guarantee does not easy as possible for our customers. That’s extend the original expiry date. The why we design products that are easy to guarantee on any replacement parts or fit and use, and that are quality tested to product ends at the original expiry date.
  • Page 19 ‘phone or with a spare part, then we’ll guarantee period, contact Bristan Care send out one of our Bristan Care Customer Service on 0844 701 6273 with engineers to take a look. Bristan Care...
  • Page 20 CAS TAPS Part Numbersa: Issue: D1 Useful contact details: Customer Service: 0844 7016273 Bristan Group Ltd. Customer Service Email: Birch Coppice Business Park Customercare@bristan.com Dordon Tamworth Customer Service Fax: Staffordshire 0844 7016275 B78 1SG Reception: Web: www.bristan.com 0844 7016274 Email: enquire@bristan.com Join us on...

Table of Contents