Table of Contents
Advertisement
D) Spinner Motors
• Check spinner motor seals daily for leaks. If spinner motor seal is leaking
replace immediately. This could cause serious damage to hydraulic system
and spinner motor.
8) Material Divider Maintenance
A) It is necessary for the material divider and spinners to be clean at all times.
B) Where excessive moisture exists it may be necessary to clean the material divider
and spinners while in the field to achieve the best possible spread pattern.
C) The material divider plays an important part in developing the proper spread
pattern. This divider is adjustable "in" and "out".
D) Proper adjustment is critical. Be sure to run the material divider throughout its
entire adjustment range daily and keep adjustment rod greased. Doing so will
maintain proper adjustment function.
7 - 2
Advertisement
Table of Contents
