Receiving Digital Stations; Grundig Scr System; Important Notes On Environmental Protec- Tion; Notes On Still Images - Grundig 40 VLE 6522 BL User Instructions

Table of Contents

Advertisement

GENERAL­INFORMATION
Devices that contain and serve video, music
7
or image files are called Server. This tele-
vision receives video, music and image
files from the server through home net-
work, allowing you to access and play
such media even when your television is
located in a different room then the server.
A DLNA compatible device such as a PC,
mobile phone, NAS or a NAS-like (Network
attached storage) device which operates as
a DMS (Digital Media Server) is required in
order to use home network.
Receiving­digital­stations
To receive digital satellite stations (DVB-S) you
7
need a satellite antenna.
To receive digital stations (DVB-T) you need a
7
digital rooftop or indoor antenna (passive or
active indoor antenna with its own power sup-
ply).
T he antenna cable of the cable TV network
7
that broadcast in DVB-C must be plugged into
TV in order to receive the DVB-C broadcasts.
Unlike analogue broadcasting, not every sta-
7
tion has its own transmission frequency. In-
stead, several stations are grouped into what
are known as bouquets on a regional or na-
tional level.
You can find the current transmission informa-
7
tion on teletext from various broadcasters, or
look in a TV guide or on the Internet.
Various digital television stations from private
7
broadcasters are encrypted (DVB-S, DVB-T
and DVB-C). Watching these stations and the
recording and playback functions are only
possible with the appropriate CI module and
a SmartCard. Ask your specialist dealer.
GRUNDIG­SCR­System
Y our TV supports SCR system (Single Chan-
7
nel Router). With SCR satellite system, several
users can individually receive all signals from
the satellite simultaneously.
ENGLISH
­ - ------------------------------------------------------------------
Important­notes­on­environmen-
tal­protection
Those items mentioned below will help you re-
duce the consumption of natural resources as
well as save your money by reducing electricity
bills.
If you will not be using the TV set for several
7
days, it should be disconnected from the mains
for environmental and safety reasons. TV will
not consume energy in this condition.
If the TV set has main switch, it will be enough
7
to turn the TV off via main switch. TV will re-
duce energy consumption almost to Zero
Watt.
TV consumes less energy on stand by mode.
7
However, some TV sets may have features
such as on timer, that require the TV set to be
left in standby to work correctly.
TV consumes less energy when brightness is
7
reduced.
Notes­on­still­images
Watching the same image for a long time on the
screen may cause a still image remain feebly on
the background. Feeble image(s) on the back-
ground is originated from LCD/LED technology
and does not require any action under guaran-
tee. To avoid such cases and/or minimize the
impact, you may observe the tips below.
Do not allow the same TV channel to stay on
7
the screen for a very long time. Channel logos
may cause this situation.
Do not allow the images, which are not full
7
screen, to constantly stay on the screen; if not
streamed in full screen format by the broad-
caster, you can convert the images to full
screen by changing picture formats.
Higher brightness and/or contrast values will
7
lead this impact to appear faster; therefore,
you are recommended to watch your TV in the
lowest brightness and contrast levels.

Advertisement

Table of Contents
loading

Table of Contents