­ W Ireless­network - Grundig 40 VLE 6522 BL User Instructions

NETWORK­SETUP
­ W ireless­network
Wireless­network­connection
There are different ways of making the wire-
less network settings. »Wireless« and »Wireless
WPS« (WiFi Protected Setup).
1 Connect Grundig WiFi USB dongle 2 to the
»USB1« or »USB2­(HDD)« socket of your
television in order to connect the television
to a wireless network.
Note:
Grundig WiFi USB dongle is not supplied
7
with the product but sold separately. Please
contact your dealer from where you have
purchased your TV.
Notes:
Wireless LAN adapter supports IEEE
7
802.11B/G and N communication pro-
tocols. We recommend you to use IEEE
802.11N protocol to obtain the best perfor-
mance in wireless HD video playback.
If you use a modem that supports IEEE
7
802.11B/G, video playback performance
may be poor when compared to a modem
that supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol is
lower.
34­ ENGLISH
­ - ------------------------------------------------------------------------------------------
Please note that video playback perfor-
7
mance in a DLNA application on a wireless
local network and in a SMART Inter@ctive
TV 3.0 application on a network with inter-
net connection depends on the number of
users on the network as it is the case in every
wireless network.
It is recommended to switch off the equip-
7
ment that are not in use in home network in
order to avoid unnecessary network traffic.
Placing the modem or wireless network shar-
7
er on an elevated location will increase the
wireless connection reception strength.
Wireless connection reception strength may
7
vary depending on the type of the modem
and the distance between the modem and
television.
Wireless­network­settings
You have several ways to connect your TV to
your home network.
A Automatic connection,
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
D epending on the router, you can use the fol-
lowing options:
– O ption "WPS-PBC" (Push Button Configura-
tion);
– Connecting with a WPS PIN;
– C onnecting by entering the network pass-
word.
B Manual connection,
a ll data regarding connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
must be configured manually.