Checking And Adjusting Leap Second Setting - Citizen CC4054-68L Instruction Manual

Checking and adjusting leap second setting

This watch displays the time by applying the leap second to the International
Atomic Time information received from satellites.
The leap second may be applied once a few years and the leap second setting on the
watch is automatically adjusted when it is applied.
Check and adjust the leap second setting manually following the steps below when
it is not adjusted automatically.
For details on leap seconds, you can find a list of leap seconds at the website
of IERS (INTERNATIONAL EARTH ROTATION & REFERENCE SYSTEMS
SERVICE):
http://hpiers.obspm.fr/eop-pc/earthor/utc/TAI-UTC_tab.html
Information on satellite signal reception
Continued on the next page
73