Citizen CC701555E Instruction Manual
  1. Manuals
  2. Brands
  3. Citizen Manuals
  4. Watch
  5. CC701555E
  6. Instruction manual

Citizen CC701555E Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Citizen CC701555E

Summary of Contents for Citizen CC701555E

  • Page 1 INSTRUCTION MANUAL...
  • Page 2 ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO PORTUGUÊS 中文（繁体字） 中文（简体字）...
  • Page 3 After reading the manual, store it in a safe place for future reference. Be sure to visit the Citizen website at http://www.citizenwatch-global.com/ . Here you will find a variety of information such as electronic setting guides, answers to frequently asked questions, Eco-Drive recharging information and more.
  • Page 4 Safety precautions — IMPORTANT This manual contains instructions that should be strictly followed at all times not only for optimal use, but to prevent any injuries to yourself, other persons or property. We encourage you to read the entire booklet (especially, pages 98 to 111) and understand the meaning of the following symbols: ■...
  • Page 5 Safety precautions ■ Important instructions are categorized and depicted in this manual as follows: (Following symbols are examples of Pictograms.) Warning (caution) symbol followed by prohibited matters. Warning (caution) symbol followed by instructions that should be followed or precautions that should be observed.
  • Page 6 Features Satellite Wave-GPS „ „ Receives location and time information sent from GPS satellites and adjusts the time and calendar on the watch automatically. Light-Level Indicator „ „ Indicates current power generation amount. It can be used as a reference for choosing a good charging place. Eco-Drive „...
  • Page 7 Measures up to 24 hours by 1 second. Alarm „ „ Sounds at the time set every day. Perpetual calendar „ „ No need for monthly and leap-year date correction until February 28, 2100. • “Eco-Drive” is an original technology of Citizen.

  • Page 8: Table Of Contents

    CONTENTS Before using this watch . . . . . . . . . . . . . . . . . . . . . . . . . . Band adjustment .
  • Page 9 CONTENTS Checking the reception result of the satellite signal . . . Setting the world time . . . . . . . . . . . . . . . . . . . . . . . . . . Checking the time zone setting for the home time .
  • Page 10 CONTENTS Using alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Charging your watch .
  • Page 11 CONTENTS Eco-Drive watch handling precautions . . . . . . . . . . . . . Water resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Precautionary items and usage limitations .

  • Page 12: Before Using This Watch

    Before using this watch This watch has a rechargeable cell which is charged by exposing the dial to light. Expose the dial to direct sunlight regularly to charge the watch. For details of charging, see page 62 -. • Especially, satellite signal reception is power consuming. Take care to keep sufficient power.

  • Page 13: Band Adjustment

    Before using this watch Band adjustment We recommend seeking the assistance of an experienced watch technician for sizing of your watch. If adjustment is not done correctly, the bracelet may unexpectedly become detached leading to loss of your watch or injury. Consult an authorized service center.

  • Page 14: How To Use A Specially Designed Crown/Button

    Before using this watch How to use a specially designed crown/button Some models are equipped with a specially designed crown and/or push button to prevent accidental operation. Screw down crown/button Unlock the crown/button prior to operate your watch. Unlock Lock Push the crown in to the Rotate the crown case.
  • Page 15 Before using this watch Recessed button Press the button with a non-marring narrow-tipped object. • Metal objects may cause marring or scratching of the button.

  • Page 16: Component Identification

    Component identification Hands and buttons Minute hand Hour hand Button B Function indication Crown Second hand Button A Mode indication Dual time indication Date indication • The illustrations in this instruction manual may differ from the actual appearance of your watch.
  • Page 17 Component identification Indication Reception-in-progress indication ( RX-TME/RX- Reception result indication ( OK/NO Function indication • Day of week • Power reserve level (5 Power generation levels) amount indication • Summer time (DST) (7 levels) setting ( SMT ON/OFF ) Mode indication Alarm setting ALM ON/OFF Place name/time zone...

  • Page 18: About Dual Time Indication

    Component identification About dual time indication This watch is equipped with the dual time function: two times are indicated in parallel. Dual time indication (Ex . : 1:09AM) • “Hour” is indicated with the marker (▲) pointing numbers on the outer circle. •...

  • Page 19: Changing The Mode

    Changing the mode This watch features six different modes (functions). The way to change the mode and indication in each mode are explained here. Changing the mode . Pull the crown out to position 1 . The second hand points to 30 seconds and stops.
  • Page 20 Changing the mode Indication in each mode (when the crown is in position 0 ) TME (ordinary time) mode Hand and indication Content Hour, minute and Home time second hands Date indication Date (home time) Day of week (home A Function indication time) Dual time Local time...
  • Page 21 Changing the mode LLI (Light-Level Indicator) mode Mode for checking power generation amount. Hand and indication Content Hour, minute and Home time second hands Date indication Date (home time) Power reserve A Function indication indication Dual time Local time indication C Mode indication Continued on the next page...
  • Page 22 Changing the mode UTC (Coordinated Universal Time) mode Mode where the dual time indication always shows UTC. Hand and indication Content Hour, minute and Home time second hands Date indication Date (home time) Day of week (home A Function indication time) Dual time indication...
  • Page 23 Changing the mode CHR (chronograph) mode • For details, see page 56 . Hand and indication Content Hour and minute Hour and minute of hands home time Second hand Chronograph second Date indication Date (home time) Function Day of week (home indication time) Dual time...
  • Page 24 Changing the mode ALM (alarm) mode • For details, see page 58 . Hand and indication Content Hour, minute and Home time second hands Date indication Date (home time) Day of week (home A Function indication time) Dual time Alarm time indication C Mode indication...
  • Page 25 Changing the mode SET (set) mode Mode for setting time and calendar manually. Hand and indication Content Hour, minute and Home time second hands Date indication Date (home time) Day of week (home A Function indication time) Dual time Local time indication C Mode indication...

  • Page 26: Checking The Power Reserve And Power Generation

    Checking the power reserve and power generation amount For details of charging, see “Charging your watch” (page 62). Indication of power generation amount in levels Indication of power reserve in levels Tail of the second hand (Ex . : level “5”) 2 1 0 Marker of function indication...

  • Page 27: Checking The Power Reserve

    Checking the power reserve and power generation amount Checking the power reserve Change the mode to [ TME ] or [ UTC ] and push the crown in to position 0 . Press and release the upper right button B . The function indication indicates the power reserve in levels (page 26 ) and the second hand points the current time zone setting of the home time.
  • Page 28 Checking the power reserve and power generation amount Indication of power reserve in levels Level Power reserve indication 1.2 years - 10 - 4 months - 5 days or Duration 1.5 - 1.2 years (approx.) 10 months 4 months 5 days shorter Insufficient Power reserve...
  • Page 29 Checking the power reserve and power generation amount CAUTION • At the level “0”, the second hand starts to move once every two seconds (insufficient charge warning function, page 64 ). Some functions become unavailable while this function is activated. For details, see page 65 . •...

  • Page 30: Checking Power Generation Amount (Light-Level Indicator)

    Checking the power reserve and power generation amount Checking power generation amount (Light-Level Indicator) Change the mode to [ LLI ] and push the crown in to position 0 . The function indication indicates the power reserve in levels (page 26 ). Press and release the upper right button B .
  • Page 31 Checking the power reserve and power generation amount Indication of power generation amount in levels The level of power generation amount means power being generated by the solar cell represented in 7 levels (0 - 6). • Power generation amount is indicated in levels with the tail or tip of the second hand (whether the tail or tip depends on models).
  • Page 32 Checking the power reserve and power generation amount CAUTION • Light level indication will change as brightness changes. In addition, the level may vary even under the same brightness due to the entry angle of light to the dial of the watch or other elements. •...

  • Page 33: Checking The Reception Result Of The Satellite Signal

    Checking the reception result of the satellite signal Change the mode to [ TME ] or [ UTC ] and push the crown in to position 0 . Press and release the lower right button A . The second hand indicates the result of the last reception. Reception was successful.
  • Page 34 Checking the reception result of the satellite signal Press and release the lower right button A to finish the procedure. The second hand returns to indicate the second. • The hand returns automatically in 10 seconds without pressing the button. About the reception result The previous reception result is stored for 6 days and “...

  • Page 35: Setting The World Time

    Setting the world time This watch can indicate the time around the world according to which of 39 time zones (offsets from UTC — Coordinated Universal Time) is chosen. You can set offsets from UTC through any of the two ways below. Method What to set Obtaining location information...

  • Page 36: Checking The Time Zone Setting For The Home Time

    Setting the world time Checking the time zone setting for the home time Change the mode to [ TME ] or [ UTC ] and push the crown in to position 0 . • Proceed to the next step after the hands stop. Press and release the upper right button B .
  • Page 37 Setting the world time How to read indication of the world time setting The watch has 39 time zone markers with several representative area names. A time zone is set by pointing the second hand at one of the markers. In the illustration on the left, the second hand points to 26 seconds and time zone setting is Time zone marker...
  • Page 38 Setting the world time Table of time zones and representative places • Countries or regions may change time zones for various reasons. • The information of the time zones and its applicable areas is that as of January 2018. Second Time zone Area name Representative area...
  • Page 39 Setting the world time Second Time zone Area name Representative area hand Delhi +5.5 Kathmandu +5.75 — Dhaka Yangon +6.5 — Bangkok Beijing/Hong Kong BJS (HKG) Pyongyang +8.5 — Eucla +8.75 — Tokyo Adelaide +9.5 Sydney Lord Howe Island +10.5 —...
  • Page 40 Setting the world time Second Time zone Area name Representative area hand Noumea Auckland Chatham Islands +12.75 — Nuku'alofa Kiritimati — Baker Island — Midway Honolulu Marquesas Islands -9.5 — Anchorage Los Angeles...
  • Page 41 Setting the world time Second Time zone Area name Representative area hand Denver Chicago New York Manaus St. John's -3.5 — Rio de Janeiro Fernando de Noronha Azores • The offsets in the table are based on the standard time. •...

  • Page 42: Obtaining Location Information From Satellite Signals

    Setting the world time Obtaining location information from satellite signals It is recommended to receive the satellite signals outdoors with the wide-open sky. For details, see “Information on satellite signal reception” (page 68). The time zone for the home time is set automatically by obtaining location information and time and calendar are consequently adjusted based on the chosen zone.
  • Page 43 Setting the world time After finishing the reception, the second hand indicates the new setting and returns to indicate the second. • To cancel the reception, press and hold any button until the second hand returns to indicate the second. About obtaining location information The time zone may not set appropriately when location information is obtained in a border of time zones, even if the information is correct.

  • Page 44: Setting The Time Zone Manually

    Setting the world time Setting the time zone manually Change the mode to [ TME ] or [ LLI ] and pull the crown out to position 2 . The second hand indicates the current time zone setting of the home time. •...
  • Page 45 Setting the world time Press and release the upper right button B . The second hand indicates the current time zone setting of the local time. • Each time you press the button, the minute hand of setting target slightly moves and the target (home time/local time) of time zone setting changes alternately.

  • Page 46: Interchanging The Home Time And Local Time

    Setting the world time Interchanging the home time and local time Change the mode to [ TME ] or [ LLI ] and push the crown in to position 0 . Press and release both the lower right button A and upper right button B simultaneously.

  • Page 47: Receiving Time Information

    Receiving time information It is recommended to receive the satellite signals outdoors with the wide-open sky. For details, see “Information on satellite signal reception” (page 68). You can use the three types of reception below to receive time information. You can also check the result of the previous reception (success or fail).
  • Page 48 Receiving time information Time reception (time required: about 3 -30 seconds) Reception for time and calendar adjustment. • It may take more time for reception when difference in time is large or calendar was set manually. Change the mode to [ TME ] or [ UTC ] and push the crown in to position 0 .
  • Page 49 Receiving time information After finishing the reception, the second hand indicates the reception result (page 31 ) and returns to indicate the second. • To cancel the reception, press and hold any button until the second hand returns to indicate the second. •...
  • Page 50 Receiving time information Leap second reception (time required: about 36 seconds - 13 minutes) Reception for the leap-second-setting adjustment. • You can also execute leap second setting manually. (page 73 ) Change the mode to [ TME ] or [ UTC ] and push the crown in to position 0 .
  • Page 51 Receiving time information After finishing the reception, the second hand indicates the reception result (page 31 ) and returns to indicate the second. • To cancel the reception, press and hold any button until the second hand returns to indicate the second. •...
  • Page 52 Receiving time information Automatic time reception The watch starts time reception automatically when the conditions belows are fulfilled: • The watch has not received satellite signals for 6 days or more. • The watch dial is being exposed to strong direct sunlight for 20 seconds or more. •...
  • Page 53 Receiving time information To cease to use automatic time reception Set the mode to other than [ ] and [ ] to use the watch. About automatic time reception Automatic time reception may be delayed in the following cases: • The second hand started to move once every two seconds (insufficient charge warning) after the last time reception.

  • Page 54: Setting Summer Time (Dst)

    Setting summer time (DST) Summer time (Daylight Saving Time: DST) is a system adopted in some countries/ areas to gain an extra daylight during summer. This watch can display summer time (DST) or standard time according to the time zone selected. •...
  • Page 55 Setting summer time (DST) Change the mode to [ TME ] or [ LLI ] and pull the crown out to position 2 . The function indication indicates summer time (DST) setting of the home time ( ) (page 54 ). SMT ON/OFF •...
  • Page 56 Setting summer time (DST) Press and release the lower right button A . Summer time (DST) is indicated. SMT ON The standard time is indicated. SMT OFF • Each time you press the button, the summer time (DST) setting ( ) changes alternately.
  • Page 57 Setting summer time (DST) Press and release the upper right button B . The function indication indicates summer time (DST) setting of the local time ( SMT ON/OFF • Each time you press the button, the minute hand of setting target slightly moves and the target (home time/local time) of time zone setting changes alternately.

  • Page 58: Using The Chronograph

    Using the chronograph The chronograph on this watch can measure up to 23 hours 59 minutes 59 seconds by 1 second. Change the mode to [ CHR ] and push the crown in to position 0 . 0 second is indicated. Start measurement.
  • Page 59 Using the chronograph Chronograph second Start/stop Button reset Button • Press and release this button to reset the chronograph after timing. Chronograph hour/minute • After 24 hours of continuous chronograph operation, the chronograph automatically stops and is reset. • The hour and minute hands and date and day-of-week indication indicate the time of the home time.

  • Page 60: Using Alarm

    Using alarm The alarm on this watch always works based on the home time. • The alarm time is set in 24-hour basis. • Take care when changing the time zone setting of the home time after setting alarm. Checking alarm setting Change the mode to [ ALM ] and push the crown in to position 0 .
  • Page 61 Using alarm The second hand indicates the current alarm setting ( ALM ON/OFF ALM ON ALM OFF • Alarm setting indication ( ) stops in 10 seconds ALM ON/OFF and returns to indicate the second automatically. Pressing button A also ends the indication. •...
  • Page 62 Using alarm Changing alarm setting Change the mode to [ ALM ] and pull the crown out to position 2 . The dual time indication indicates the current alarm time setting and the second hand shows the current alarm setting ALM ON/OFF •...
  • Page 63 Using alarm • “Hour” is indicated with the marker ( ▲ ) pointing numbers on the outer circle. “Minute” is indicated with the minute hand and makers on the inner circle. Ex . 7:15 AM Hour marker of the alarm time Press and release the lower right button A to set the alarm setting ( ALM ON/OFF ).

  • Page 64: Charging Your Watch

    Charging your watch This watch has a rechargeable cell which is charged by exposing the dial to light, such as direct sunlight or fluorescent lamps (refer to page 66 for charging guidelines). For optimal performance, be sure to: • Put the watch in a location where the dial is exposed to bright light such as by the window even when it is not used.
  • Page 65 Charging your watch CAUTION • This watch contains a large-capacity rechargeable cell for performing power- consuming satellite signal reception. This large capacity cell takes more time to charge than those found in other Eco-Drive watches. • If the surrounding temperature falls below 0°C (32°F) or exceeds 40°C (104°F), the “Charge suspension temperature detection function”...
  • Page 66 Charging your watch When the watch reaches a low charge state (insufficient charge warning function) When the power reserve becomes low, the second hand moves once every two seconds. This is the insufficient charge warning function. Be sure to fully charge your watch immediately as outlined on page 66 .
  • Page 67 Charging your watch During the insufficient charge warning state The time and date is indicated correctly. • In any mode other than [ ], indication is the same as that in the [ ] mode. Operations below are available: - Checking power generation amount - Setting the world time - Adjusting the time and calendar manually - Resetting the watch - All Reset...
  • Page 68 Charging your watch Charging time by environment Below are the approximate charging times when exposing to light continuously. Please use this table as a reference only. Charging time (approx.) Illuminance To start working To become fully Environment (lx) To work for one day normally when the charged when the cell cell is discharged...
  • Page 69 Charging your watch Power save function The hour, minute and second hands stop automatically to save power as 3 days passed after starting to keep the watch in a dark place such as in a case. • The watch is still running internally to keep the time and calendar correctly even after the power save function has activated.

  • Page 70: Information On Satellite Signal Reception

    Information on satellite signal reception This watch receives time information from satellites to indicate the time and calendar. It also obtains location information from them to indicate time appropriate in the area where it is actually used. For receiving the satellite signal smoothly Satellite signal reception is power consuming.
  • Page 71 Information on satellite signal reception Cautions regarding receiving the satellite signal Do not perform signal reception while operating a vehicle as doing so is extremely dangerous. • If the second hand is moving once every two seconds (insufficient charge warning function), you cannot perform satellite signal reception.
  • Page 72 Information on satellite signal reception When receiving the satellite signal As shown in the picture below, make sure you are in an area with few surrounding trees, buildings, or other objects which may obstruct the satellite signal. Face the dial towards the sky and perform signal reception. •...
  • Page 73 Information on satellite signal reception Receiving signals indoors near a window Place the watch near a window with a wide view of the sky and orient the dial in an obliquely upward direction to the sky. • Signal reception from some satellites is required for obtaining location information.
  • Page 74 Information on satellite signal reception Poor reception areas It may be difficult to receive the satellite signal under certain environmental conditions or in certain areas. Areas with obstructions above the watch Nearby objects which emit magnetism or noise • High-voltage electric cables, railway •...

  • Page 75: Checking And Adjusting The Leap Second Setting

    Information on satellite signal reception Checking and adjusting the leap second setting This watch displays the time by applying the leap second to the International Atomic Time information received from satellites. The leap second may be applied once a few years and the leap second setting on the watch is automatically adjusted when it is applied.
  • Page 76 Information on satellite signal reception Change the mode to [ SET ] and pull the crown out to position 2 . The second hand stops. Press and hold upper right button B for 2 seconds or more. Using the “0:00:00” position as the starting point, the minute and second hands indicate the leap second setting.
  • Page 77 Information on satellite signal reception Turn the crown to adjust the setting if the leap second is not correct. • Adjustable range is from 0 to ‒90 seconds. Change the mode to [ TME ] and push the crown in to position 0 to finish the procedure.

  • Page 78: Checking And Adjusting The Rollover Number Setting

    Information on satellite signal reception Checking and adjusting the rollover number setting In order for this watch to correctly process the week information* received from the satellite, a rollover number for each time period is set. The rollover numbers will be updated automatically. If the rollover number setting is incorrect, the time and date may not be indicated accurately.
  • Page 79 Information on satellite signal reception Table of rollover number and time period Time period (Coordinated Universal Time, GMT) Rollover number 22/8/1999 (Sun) 0:00 – 7/4/2019 (Sun) 0:00 – 21/11/2038 (Sun) 0:00 – 7/7/2058 (Sun) 0:00 – 20/2/2078 (Sun) 0:00 – 6/10/2097 (Sun) 0:00 –...
  • Page 80 Information on satellite signal reception Change the mode to [ SET ] and pull the crown out to position 2 . The second hand stops. Press and hold the upper right button B for 2 seconds or more until the leap second setting is indicated. •...
  • Page 81 Information on satellite signal reception Turn the crown to adjust the setting if it is not correct. • Adjustable range is from “0” to “5”. • See “Table of rollover number and time period” (page 77) and set the correct rollover number. Change the mode to [ TME ] and push the crown in to position 0 to finish the procedure.

  • Page 82: Adjusting The Time And Calendar Manually

    Adjusting the time and calendar manually You can set the time and calendar of the home time manually. • Execute world time setting (page 33 ) beforehand. • The time of the local time is corrected automatically following its time zone setting after setting the home time manually.
  • Page 83 Adjusting the time and calendar manually Press and release the lower right button A repeatedly to change the hand/indication to be corrected. • Each time you press the button, the target changes as follows: (back to the Hour and minute → date → year/month → day of week → top) •...
  • Page 84 Adjusting the time and calendar manually . Rotate the crown to adjust the hand/indication. • Hour, minute and date move synchronously. Take care the time set is AM or PM. Change of date indication shows it just became AM. • Year and month are indicated with the second hand. Set them referring to page 84 .
  • Page 85 Adjusting the time and calendar manually Push the crown in to position 0 in accordance with a reliable time source. The second hand starts moving from 0 second. Change the mode to [ TME ] to finish the procedure.
  • Page 86 Adjusting the time and calendar manually Month and year indications Set the year and month with the position of the second hand. “Month” corresponds to one of the 12 “Year” corresponds to the years since zones shown in the figure below. leap year and is indicated with markers Each number means month.
  • Page 87 Adjusting the time and calendar manually Years since leap Year Second hand year Hour marker (Leap year) 2016 2020 2024 2028 2032 1st min. marker 2017 2021 2025 2029 2033 2nd min. marker 2018 2022 2026 2030 2034 3rd min. marker 2019 2023 2027...

  • Page 88: Troubleshooting

    Troubleshooting Checking and correcting the reference position If the time or calender is not shown correctly even after proper reception of the time signal, check whether the reference position is correct. • If the hands and indication do not reflect the correct reference position, the time and calendar will not be indicated accurately even if the satellite signal is received.
  • Page 89 Troubleshooting Change the mode to [ CHR ] and pull the crown out to position 2 . The second hand and dual time indication point to 0 position and stop. Press and hold the lower right button A . The hands and indication start to move to the current reference positions stored in memory.
  • Page 90 Troubleshooting Press and release the lower right button A . The function indication slightly moves and the indication and date indication become adjustable. Press and release the lower right button A repeatedly to change the hand/indication to be corrected. • Each time you press the button, the target changes as follows: Function indication/date indication →...
  • Page 91 Troubleshooting Rotate the crown to adjust the hand/indication. • When you rotate the crown quickly a few times, the hand/ indication will move continuously. To stop the rapid movement, rotate the crown in either direction. Repeat steps 5 and 6. Push the crown in to position 0 .

  • Page 92: Symptom And Remedies

    Troubleshooting Symptom and Remedies Symptom Remedies Page Problems with satellite signal reception − Check whether the mode is [ ] or [ When the second hand moves once every two seconds, the watch cannot receive signals. Charge the watch. Reception is Avoiding places where the satellite signal may be unsuccessful.
  • Page 93 Troubleshooting Symptom Remedies Page Problems with satellite signal reception (continued) Automatic time reception does not Check whether the mode is [ ] or [ work correctly. Check the world time setting. Check the summer time (DST) setting. Execute leap second reception if the time and The correct time calendar is still incorrect even after executing and calendar are...
  • Page 94 Troubleshooting Symptom Remedies Page Movement of a hand/indication seems strange Indication is incorrect. Check the mode. Charging may be stopped (non-chargeable The power reserve is not state). indicated. Check it again at a location of suitable temperature. The second hand moves Charge the watch.
  • Page 95 Troubleshooting Symptom Remedies Page Time/calendar is abnormal. Check the world time setting. Check the summer time (DST) setting. Time/calendar is Receive the satellite signal to adjust the time and incorrect. calendar. Check and correct the reference position. Adjust the time and calendar manually. Time is incorrect though Check the summer time (DST) setting.
  • Page 96 Troubleshooting Symptom Remedies Page Charging and other problems If the surrounding temperature falls below 0°C (32°F) or exceeds 40°C (104°F), the “Charge suspension temperature detection function” will activate and charging will not be possible. The watch does not If the “Over discharge detection function” is activated, work even though it is charging is not possible.
  • Page 97 Troubleshooting Symptom Remedies Page Charging and other problems (continued) Charge the watch for 2 to 3 days under direct sunlight. If the second hand starts moving once every The watch stops two seconds the watch is being charged correctly. − immediately after it is Continue charging even when the second hand starts charged.
  • Page 98 Troubleshooting Resetting the watch — All Reset When the watch does not work properly, you can reset all the settings. If the power reserve is insufficient, charge the watch first. Be sure to perform the following operations after All Reset. .
  • Page 99 Troubleshooting Change the mode to [ CHR ] and pull the crown out to position 2 . Press and hold buttons A and B at the same time for 4 seconds or more and release them. Alarm sounds as the buttons are released and the hands move to their current reference position.

  • Page 100: Eco-Drive Watch Handling Precautions

    Eco-Drive watch handling precautions <Always Make Sure to Recharge Frequently> • For optimal performance, your watch should remain fully charged. • Long sleeves may inhibit light transmission to your watch. This may result in your watch loosing charge. In these cases supplemental charging may be necessary.
  • Page 101 Eco-Drive watch handling precautions CAUTION Recharging Precautions • Do not charge the watch at a high temperature (about 60 °C (140 °F) or higher) as doing so may cause the movement to malfunction. Examples: • Charging the watch too close to a light source which generates a large amount of heat such as an incandescent lamp or halogen lamp.
  • Page 102 Eco-Drive watch handling precautions <Replacement of Rechargeable Cell> • This watch utilizes a special rechargeable cell that does not require periodical replacement. However power consumption may increase after using the watch for a number of years due to wear of internal components and deterioration of oils. This may cause stored power to be depleted at a faster rate.
  • Page 103 Eco-Drive watch handling precautions WARNING Use Only the Specified Battery • Never use a battery other than the rechargeable cell specified for use in this watch. Although the watch structure is designed so that it will not operate when another type of battery is installed, if a conventional watch battery or other type of battery is installed in the watch and the watch is recharged, there is the risk of overcharging which may cause the battery to rupture.

  • Page 104: Water Resistance

    Water resistance WARNING Water Resistance • Refer to the watch dial and/or the case back for the indication of the water resistance of your watch. The following chart provides examples of use for reference to ensure that your watch is used properly.
  • Page 105 Water resistance Water-related use Operate the Minor crown or exposure to Swimming Scuba diving Saturation button when water (washing and general Skin diving, using an air diving using the watch face, rain, etc.) washing work marine sports tank helium gas is wet mospheres mospheres...
  • Page 106 Water resistance • Non-water resistant models are not designed to come into contact with any moisture. Take care not to expose a watch with this rating to any type of moisture. • Water resistance for daily use (to 3 atmospheres) means the watch is water resistant for occasional accidental splashing.

  • Page 107: Precautionary Items And Usage Limitations

    Precautionary items and usage limitations CAUTION To Avoid Injury • Be particularly careful when wearing your watch while holding a small child, to avoid injury. • Be particularly careful when engaged in strenuous exercise or work, to avoid injury to yourself and others.
  • Page 108 Precautionary items and usage limitations CAUTION Precautions • Always use the watch with the crown pushed in (normal position). If the crown is of the screw lock-type, make sure it is securely locked. • Do not operate the crown or any push buttons when the watch is wet. Water may enter the watch causing damage to vital components.
  • Page 109 Precautionary items and usage limitations CAUTION When Wearing Your Watch <Band> • Leather bands and rubber (urethane) bands will deteriorate over time due to perspiration dirt. Because of the natural materials, leather band will be worn, deformed, and discolored over time.
  • Page 110 Precautionary items and usage limitations CAUTION When Wearing Your Watch (continued) • Please request adjustment or repair of the band in the following cases: - You notice an abnormality with the band due to corrosion. - The pin of the band is protruding. •...
  • Page 111 Precautionary items and usage limitations <Strong Shock> • Avoid dropping the watch or subjecting it to other strong impact. It may cause malfunctions and/or performance deterioration as well as damage to the case and bracelet. <Static Electricity> • The integrated circuits (IC) used in quartz watches are sensitive to static electricity. Please note the watch may operate erratically or not at all if exposed to intense static electricity.
  • Page 112 Precautionary items and usage limitations CAUTION Always Keep Your Watch Clean • Rotate the crown while it is pressed in fully and press the buttons periodically so they do not become stuck due to accumulations of foreign matter. • The case and band of the watch come into direct contact with the skin. Corrosion of the metal or accumulated foreign matter may result in black residue coming from the bracelet when exposed to moisture or perspiration.
  • Page 113 Precautionary items and usage limitations Caring for Your Watch • Wipe any dirt or moisture such as perspiration from the case and crystal with a soft cloth. • For metallic, plastic or synthetic rubber (polyurethane) band, clean it with soap and a soft toothbrush.

  • Page 114: Specifications

    Specifications F990 Analog solar-powered watch Model Type Timekeeping Average monthly accuracy: ±5 seconds when worn at normal accuracy operation temperatures between +5°C (41°F) and +35°C (95°F) (without reception) Operating ‒10°C (14°F) to +60°C (140°F) temperature range • Time: Hours, minutes, seconds •...
  • Page 115 Specifications • Solar power function • Indicating the result of the last • Overcharging prevention function reception (OK/NO) • Insufficient charge warning function • World time—39 time zones (27 place (two-second interval movement) names) • Over discharge detection function • Summer time (DST) (SMT ON/OFF) •...
  • Page 116 European Union directives conformance statement Hereby, CITIZEN WATCH CO.,LTD. declares that this product is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU and all other relevant EU directives. You can find your product’s Declaration of Conformity at...
  • Page 117 ＊ Model No.CC7 Cal.F990 CTZ-B8198...

This manual is also suitable for:

F990Cc7005-16eCc7014-82eCc7015-55e

Table of Contents