6.2 Storage of Auger
_
Make sure that auger is in the full down position. Remove all residual material
from the hopper and auger tubes. Touch up all scratches on the auger to
prevent rusting.
Clean and re-lubricate spline on the PTO driveline. Cover with plastic bag to
protect from weather, and place it in the transport latch.
Move auger to your storage area, park, and chock wheels.
Before using the auger after storage, replace any damaged parts or decals,
remove plastic bag from PTO driveline and re-lubricate, and conduct general
maintenance procedure.
19