Operating Determinations; Installation - EuroLite LCD-MOUNT LCH-37M User Manual

For installations on wood beam walls: always use a detector (beam finder) in order to center the fixation
screws.
Never mount this product to metal studs.
Before assembling, check the location of the nearest mains socket.
Use a spirit level when attaching the wall mount. Crooked attachment will reduce stability.
The total weight of the load must never exceed the maximum load of the wall-mounting.
Always tighten screws and nuts firmly, but do not overtighten.
EUROLITE accepts no liability for damages caused by incorrect assembly or by improper use.

OPERATING DETERMINATIONS

This wall-mounting is designed for installing an LCD-TV or plasma-TV to the wall. The given maximum load
must never be exceeded.
This wall-mounting is designed for professional use, e.g. on stages, in discotheques, theatres etc. and in
private homes.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing.
The maximum service life must never be exceeded.
Please consider that unauthorized modifications on the wall-mounting are forbidden due to safety reasons!
If this wall-mounting will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like crash etc.

INSTALLATION

The installation of the device has to be built and constructed in a way that it can hold 5 times the weight for 1
hour without any harming deformation.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
9/13 00028309.DOC, Version 1.0