NEC Built-In AIT User Manual page 34

5
Select [Install the software automati-
cally (Recommended)], insert the CD
provided, then click the [Next] button.
The [Please select the best match for
your hardware from the list below.]
screen appears.
6
Select the hardware associated to
"d:\DeviceDriver\xp\32\s32ait.inf",
then click the [Next] button.
The [Completing the Hardware Update
Wizard] screen appears.
(In this manual, the CD-ROM drive is
assigned as drive D but it may be
different depending on your operating
environment.)
7
Click the [Finish] button.
34 Built-in AIT