FTE Maximal MAX T115 HD+ Quick Installation Manual page 24

OSD 39
OSD 40
OSD 41
OSD 42
TOOLS
Press [Menu] in the TV mode to enter the main menu (OSD
39).
1. Press [ ] to select the Tools item.
2. Press [OK] to enter the selected item.
In the Tools menu (OSD 40):
3. Press [ ] to select the wanted menu item.
4. Press [OK] to enter the selected item among.
- Information
- Load Factory Default
- Software Upgrade by OTA
- Software Upgrade by USB
- Media Player
- Safely Remove Storage Device
6.1 INFORMATION
1. When you enter to "Information" menu, you will see a
screen like above (OSD 41). The screen displays some
parameters of information of current channel, and this
function same as the function [Information] in the full
screen play mode.
2. Press [Exit] key to draw back from "Tools" menu.
6.2 LOAD FACTORY DEFAULT
When you press [OK] on the "Factory Setting" item:
1. A warning message will be displayed like the one beside
(OSD 42).
2. If you select "Yes" then all changes you made will be reset
to default values. Make sure you really want to do this!
3. Press [Exit] in both steps will close the window without
resetting the receiver.
6.3 SOFTWARE UPGRADE BY OTA
This option allows updating the software of the receiver
through the data received by OTA.
1. Please select the multiplex or introduce directly the values
for the updating.
2. Please select "Start" and press [OK] for starting the
software updating (OSD 42A).
6.4 SOFTWARE UPGRADE BY USB
This option allows updating the software of the receiver with
the received data from a USB 2.0 memory device. To do
it, connect a USB 2.0 memory device to the receiver and
accede to this menu option (OSD 43).
The last software version to be loaded must be placed at the
PAG. 24
6.TOOLS