Basic Operations; Channel List - FTE Maximal MAX T115 HD+ Quick Installation Manual

OSD 1
OSD 2
OSD 3

BASIC OPERATIONS

2.1 STANDBY
1.Press [Power] button to switch from TV mode to Standby
mode
2.In Standby mode press [Power] button again to switch back
to TV mode. The last active channel
will be showed.
3.To switch off the STB complete press the main power
button.
2.2 PR+/PR-
In TV mode press [Channel Up/Channel Down] to change
channel.
2.3 VOL+/VOL-
In TV mode, press [Volume Up/Volume Down] to adjust
volume.
2.4 NUMBER
In TV mode you can enter the channel number directly with
your remote control unit and confi rm the number with the OK
button to change to the desired channel.
2.5 TV/RADIO
In TV mode, press [TV/RADIO] to switch to Radio mode. In
Radio mode press [TV/RADIO] again to switch back to TV
mode.

2.6 CHANNEL LIST

1. In full screen, press [OK/List] key can enter "Channel
List", please refer to TV Channel List for detail information
(OSD 1).
2.7 AUDIO
1.In TV mode, press the [Audio] button to open the Audio
Mode window. (OSD 2)
2.8 EPG
1.The STB has an Electronic Program Guide (EPG) to help you
navigate channels through all the possible viewing options.
The EPG supplies information such as channel listings and
starting and ending times for all available channels. Press
[EPG] key to display EPG screen. (OSD 3)
2.Press [EXIT] key can play the current channel in full
screen.
3.Press number key [OK] can display the current channel
detail information. The window is like below.
4.We should press green button if we wish to program a timing
of the selected event. The timing window will be opened
automatically and this way we will be able to confi rm the
programming of the event. We should press Exit if we wish
PAG. 12
2. HOTKEY