GRAUPNER 6444 Operating Manual page 31

7-3. TRACE DATA <3/4>
- This is to check battery condition.
- Memory consists of "ROM", even if power is OFF, the data still leaves.
- MEMORY setting
MIN. RES.
LAST CHG
LAST DSCH
MAX CHG
MAX DSCH
TOTAL CHARGES
NEW
7-4. OPERATION GRAPHIC
- Graph does not exist in each memory. Instead, graph is shown for last operation.
- Check graph for voltage, current, and temperature in the graph.
- Memory consists of "ROM", even if power is OFF, the data still leaves.
0x (zoom)
A,M(auto,manual) - Select Auto or Manual for Y axis.
Y axis value
center value
position
graph type
0 - min. internal battery resistance up to
now.
0mAh - Last charged capacity
0mAh - Last discharged capacity
0mAh - Biggest charged capacity up to now
0mAh - Biggest discharged capacity up to
now
0 - Charged number up to now
00/00/2007 - Date of using battery for the first time
- It means time of X axis and 1~43 can be set.
Ex) If one screen of X axis of 1X is 2minutes, if 10x is
set, 20minutes can be shown in the screen.
The more zoom is bigger, the less accuracy of the
graph becomes.
A(Auto) : If Auto is set, Vy and Vc are automatically set.
M(Manual) ; If Manual is set, Vy and Vc can be man.
set
- One scale of voltage of Y axis
- Voltage of center position of Y axis
- Location for graph moving
-
V – Voltage graph with indication of Vc and V
I – Current graph with indication of AC and A
T – Temperature graph with indication of Fc and F
Page 31/53