Advertisement

Quick Links

TR2450AR
OWNER'S MANUAL
TERMS OF USE
INSTALLER TERMS OF USE
Automotive Data Solutions Inc. ("ADS") products are strictly intended for installation by Certified Technicians
who are employed by a registered business specialized in the installation of automotive aftermarket electronics
products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician's
responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in
Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential
damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of
economic opportunity and the like that may or may not have resulted from the use, misuse, improper
installation or operation of its products. Purchasers sole contractual remedy is refund of the purchase price of
the ADS product(s). ADS reserves itself the right to suspend any Weblink® account without notice and decline
to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
END USER TERMS OF USE
ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system
meets all safety regulations and operates as intended by the manufacturer, please follow the usage
recommendations below:
• DO NOT use this product for any purpose other than its intended usage.
• DO NOT remote start a vehicle in an indoor or enclosed area (i.e. garage). Exhaust fumes are extremely
dangerous and can cause personal injury or death. Install carbon monoxide detectors in every living area that
can be exposed to vehicle exhaust fumes.
• DO NOT remote start a vehicle while it is being serviced. Follow the Valet Mode procedure as outlined in your
Owner's Manual.
• DO NOT remote start a vehicle in gear.
• DO NOT remote start a vehicle with the key in the ignition.
• DO NOT remote start a vehicle left unattended with open windows, unlocked doors or open convertible top.
• DO NOT allow children handle or operate long range remotes.
• ALWAYS engage your emergency brake prior to exiting your vehicle. This may limit motion if the vehicle is
accidentally started in gear.
• AVOID remote starting your vehicle while passengers or pets are on board. This may increase the risk of
2022-01-29 © Automotive Data Solutions Inc. 1/16

Advertisement

Table of Contents
loading

Summary of Contents for ADS TR2450A

  • Page 1 Technicians, non-compliant Certified Technicians or end users. END USER TERMS OF USE ADS products are designed to remote start vehicles from a distance. In order to ensure your iDatastart system meets all safety regulations and operates as intended by the manufacturer, please follow the usage recommendations below: •...
  • Page 2: Remote Overview

    REMOTE OVERVIEW Your iDatastart remote start system may include one or both long-range remotes listed below. Please take a moment to familiarize yourself with their general features. REMOTE MODEL TR2450A Buttons Communication / Max. Range 2-Way / 1 Mile Transmit confirmation (TX) Top LED (Amber) Receive confirmation (RX)
  • Page 3 TR2450AR REMOTE COMMANDS & CONFIRMATIONS Thanks to their multiplexing technology, iDatastart remotes can pack over 30 functions using only 5 buttons. In order to get the most out of your remotes, please take a moment to get acquainted with the following functions below: NOTES: 1.
  • Page 4 TR2450AR PANIC* COMMAND Panic* BUTTON DESCRIPTION Triggers the panic siren. CONFIRMATION 1 chime + 1 flash AUX 5* COMMAND AUX 5* BUTTON DESCRIPTION To be completed by Authorized Dealer if applicable TRUNK RELEASE COMMAND Trunk Release* BUTTON DESCRIPTION Releases the trunk or hatch. ENGINE START/STOP* COMMAND Engine Start/Stop*...
  • Page 5 TR2450AR AUX 2 COMMAND AUX 2 BUTTON DESCRIPTION To be completed by Authorized Dealer if applicable AUX 3 COMMAND AUX 3 BUTTON DESCRIPTION To be completed by Authorized Dealer if applicable AUX 4 COMMAND AUX 4 BUTTON DESCRIPTION To be completed by Authorized Dealer if applicable 2ND CAR MODE COMMAND 2nd Car Mode...
  • Page 6 TR2450AR COMMAND Silent Unlock* BUTTON DESCRIPTION Disables the vehicle’s horn and alarm siren. VALET MODE ON/OFF COMMAND Valet Mode ON/OFF BUTTON Turns off remote start and security features when DESCRIPTION servicing your vehicle or valet parking. Keyless entry features remains functional. •1 chime ON CONFIRMATION •2 chimes OFF...
  • Page 7 TR2450AR COMMAND Ignition Lock ON/OFF BUTTON DESCRIPTION Automatically locks doors when engine is running. •1 chime ON CONFIRMATION •2 chimes OFF PASSIVE LOCK ARM ON/OFF COMMAND Passive Lock & Arm ON/OFF BUTTON Automatically locks and arms your vehicle 60 seconds DESCRIPTION after you unlock it.
  • Page 8: Programming A New Remote

    TR2450AR COMMAND Lock Remote BUTTON DESCRIPTION Disables all functions on your remote. CONFIRMATION 1 chime + 1 flash UNLOCK REMOTE ON/OFF COMMAND Unlock Remote ON/OFF BUTTON DESCRIPTION Enables all functions on your remote. CONFIRMATION 2 chimes + 2 flashes MUTE REMOTE ON/OFF COMMAND Mute Remote ON/OFF BUTTON...
  • Page 9 TR2450AR 1. Insert a 25 cent coin into the hollow corner of your iDatastart remote. 2. Gently twist the coin until the casing pops open. 3. Use your coin to pry open the rest of the case perimeter. 4. Carefully remove the circuit board from the case. 5.
  • Page 10: Adjusting Engine Runtime Settings

    TR2450AR ADJUSTING ENGINE RUNTIME SETTINGS Once remote started from your factory key fob or long-range remote, your vehicle will run for the programmed ‘runtime’ setting. The default runtime is 15 minutes but it can also be programmed for 3, 5, 10, 25, 30 or 35 minutes.
  • Page 11: Remote Start Troubleshooting

    TR2450AR FUNCTION # OF PARKING LIGHT FLASHES Valet Mode ON Valet Mode OFF With iDatastart Remote: Turn ignition ON, then press FUNCTION # OF PARKING LIGHT FLASHES Valet Mode ON Valet Mode OFF With iDatastart Antenna: Turn ignition ON, then press & hold button for 5 seconds FUNCTION # OF PARKING LIGHT FLASHES Valet Mode ON...
  • Page 12: Vehicle Shutdown Troubleshooting

    TR2450AR # OF PARKING LIGHT FLASHES DIAGNOSTIC SOLUTION 3 + 1 Need to learn tach 3 + 2 Key in ignition at ON position Remove key from ignition 3 + 3 Door is open Close door 3 + 4 Trunk is open Close trunk 3 + 5 Brake is detected...
  • Page 13: Limited Lifetime Warranty

    Module overheat protection Contact Authorized Dealer LIMITED LIFETIME WARRANTY Automotive Data Solutions Inc. (“ADS”) warrants to the original purchaser of the iDatastart product that the following components product shall be free of defects in material and workmanship under normal use and circumstances: Control module and installation harnesses For as long as the original purchaser owns the vehicle in which it was originally installed.
  • Page 14: Fcc Statement

    • The vehicle in which the product was originally installed is transferred to a new owner. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the installation or operation of an iDatastart product.
  • Page 15: Sar Information Statement

    TR2450AR This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 16 TR2450AR STARTER (TWO WAY) is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on the Grantee Code: 2AEPJ. Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow-com.com.* In the United States and Canada, the SAR limit for REMOTE CAR STARTER (TWO WAY) used by the public is 4.0 watts/kg (W/kg) averaged over one gram of tissue.

Table of Contents